https://otssuperfine.en.alibaba.com/

Anhui OTS Superfine Technology Co., Ltd., D1, B2 # , Jiabao Industrial Zone, Bridge Development Area, Anhui, Anqing (2025)

30/09/2025

OTS Medical👩‍⚕️

Brand:OTS
Specification:0.74mx2200m，0.98mx2200m and etc,Custom made
Package:Upon request
Raw Material:70g Textured Creped Paper ,Pressure-sensitive Adhesive, Medical Glue
Sterilization method: Steam/EO
Quality Certification: CE, ISO13485
Safety standard: ISO 9001
MOQ: 10Roll
Application: Hospital, dental clinic, beauty saloon, etc

Welcome 24 hours consultation😀😀
Whatsapp/Phone:+86 198 5559 9646
E-Mail: director@otssuperfine.com

29/09/2025

Model：OTS-ET
Specification：12mmx 50m,19mmx 50m,25mmx 50m Or Custom made
Color change indicator：Red change to Green
Package：76rolls/ctn,48rolls/ctn,36rolls/ctn or Custom made
Brand ：OTS
Sterilization method：Suitable for ethylene oxide sterilization
Packing box：Support Customization
Material：Use medical profile paper as the substrate, the ink made of special thermal chemical dyes and colorants. coated with obligue stripe as an indicator. the reverse side coated with pressure-sensitive adhesive
We sell to countries all over the world！
E-Mail：director@otssuperfine.com
you can contact us
Whatsapp: 86 198 5559 9646
Mob:86-198 5559 9646 ✊

28/09/2025

OTS Medical👩‍⚕️

Model
OTS-ET
Specification
12mmx 50m,19mmx 50m,25mmx 50m Or Custom made
Color change indicator
Red change to Green
Package
76rolls/ctn,48rolls/ctn,36rolls/ctn or Custom made
Brand
OTS
Sterilization method
Suitable for ethylene oxide sterilization
Packing box
Support Customization
Material
Use medical profile paper as the substrate, the ink made of special thermal chemical dyes and colorants. coated with obligue stripe as an indicator. the reverse side coated with pressure-sensitive adhesive
Description of product
The first type of chemical indicators that meet the require-ments of ISO11140, the color will change significantly afterreaching the sterilization conditions.
Suitable for ethylene oxide sterilization,the ethylene oxidesterilization concentration is 600±30ml/L, the temperatureis54°C±1°C the humidity Under the condition of 60%±10% sterilize for more than 20min±15s.
Scope of use
lt is suitable for process monitoring of sterilization effect during ethylene oxide sterilization
Preservation method
Avoid light, room temperature, ventilated, dry, sealedstorage. Protect from moisture, and prohibit contact with acid and alkaline substtances.
We sell to countries all over the world！
E-Mail：director@otssuperfine.com
you can contact us
Whatsapp: 86 198 5559 9646
Mob:86-198 5559 9646 ✊

26/09/2025

OTS Medical👩‍⚕️

Model
OTS-ET
Specification
12mmx 50m,19mmx 50m,25mmx 50m Or Custom made
Color change indicator
Red change to Green
Package
76rolls/ctn,48rolls/ctn,36rolls/ctn or Custom made
Brand
OTS
Sterilization method
Suitable for ethylene oxide sterilization
Packing box
Support Customization
Material
Use medical profile paper as the substrate, the ink made of special thermal chemical dyes and colorants. coated with obligue stripe as an indicator. the reverse side coated with pressure-sensitive adhesive
Description of product
The first type of chemical indicators that meet the require-ments of ISO11140, the color will change significantly afterreaching the sterilization conditions.
Suitable for ethylene oxide sterilization,the ethylene oxidesterilization concentration is 600±30ml/L, the temperatureis54°C±1°C the humidity Under the condition of 60%±10% sterilize for more than 20min±15s.
Scope of use
lt is suitable for process monitoring of sterilization effect during ethylene oxide sterilization
Preservation method
Avoid light, room temperature, ventilated, dry, sealedstorage. Protect from moisture, and prohibit contact with acid and alkaline substtances.

We sell to countries all over the world！
E-Mail：director@otssuperfine.com
you can contact us
Whatsapp: 86 198 5559 9646
Mob:86-198 5559 9646 ✊

25/09/2025

OTS Medical👩‍⚕️

Specification：12mmx 50m,19mmx 50m,25mmx 50m Or Custom made
Color change indicator：Red change to Green
Package：76rolls/ctn,48rolls/ctn,36rolls/ctn or Custom made
Brand ：OTS
Sterilization method：Suitable for steam ethylene oxide plasma sterilization
Packing box：Support Customization
Material：Use medical profile paper as the substrate, the ink made of special thermal chemical dyes and colorants. coated with obligue stripe as an indicator. the reverse side coated with pressure-sensitive adhesive
Payment Terms: EWX, FOB, CNF, CIF, DDU, DDP etc.
Lead time:3-5 workdays if small order; 5-15 workdays
Transport:
1. DHL, FEDEX, UPS, TNT, EMS (2-7 workdays)
2. Air transport (3-7 workdays)
3. Sea transport (usually36-42 days)
We sell to countries all over the world！
E-Mail：director@otssuperfine.com
you can contact us
Whatsapp: 86 198 5559 9646
Mob:86-198 5559 9646 ✊

24/09/2025

OTS Medical👩‍⚕️

Specification：12mmx 50m,19mmx 50m,25mmx 50m Or Custom made
Color change indicator：Red change to Green
Package：76rolls/ctn,48rolls/ctn,36rolls/ctn or Custom made
Brand ：OTS
Sterilization method：Suitable for steam ethylene oxide plasma sterilization
Packing box：Support Customization
Material：Use medical profile paper as the substrate, the ink made of special thermal chemical dyes and colorants. coated with obligue stripe as an indicator. the reverse side coated with pressure-sensitive adhesive
Payment Terms: EWX, FOB, CNF, CIF, DDU, DDP etc.
Lead time:3-5 workdays if small order; 5-15 workdays
Transport:
1. DHL, FEDEX, UPS, TNT, EMS (2-7 workdays)
2. Air transport (3-7 workdays)
3. Sea transport (usually36-42 days)

We sell to countries all over the world！
E-Mail：director@otssuperfine.com
you can contact us
Whatsapp: 86 198 5559 9646
Mob:86-198 5559 9646 ✊

23/09/2025

OTS Medical👩‍⚕️

Specification：12mmx 50m,19mmx 50m,25mmx 50m Or Custom made
Color change indicator：Red change to Green
Package：76rolls/ctn,48rolls/ctn,36rolls/ctn or Custom made
Brand ：OTS
Sterilization method：Suitable for steam ethylene oxide plasma sterilization
Packing box：Support Customization
Material：Use medical profile paper as the substrate, the ink made of special thermal chemical dyes and colorants. coated with obligue stripe as an indicator. the reverse side coated with pressure-sensitive adhesive
Payment Terms: EWX, FOB, CNF, CIF, DDU, DDP etc.
Lead time:3-5 workdays if small order; 5-15 workdays
Transport:
1. DHL, FEDEX, UPS, TNT, EMS (2-7 workdays)
2. Air transport (3-7 workdays)
3. Sea transport (usually36-42 days)
We sell to countries all over the world！
E-Mail：director@otssuperfine.com
you can contact us
Whatsapp: 86 198 5559 9646
Mob:86-198 5559 9646 ✊

22/09/2025

OTS Medical👩‍⚕️
Type 5
Model
OTS-SI
Specification
52mm*22mm
Intended Use
· Monitor steam sterilization cycles in autoclaves.
· Confirm that the critical process parameters (temperature, time, steam) have been achieved in each load.
· For internal process control only; it does not replace release based on biological indicator results when required by
regulations.
Package
250PCS/BAG
Brand
OTS
Sterilization method
Steam
Applicable Standards
· ISO 11140-1:2014: Chemical indicators for sterilization processes.
· Complies with Type 5 classification (Chemical Integrator), equivalent in performance to a biological indicator under reference
conditions.
Description of product
The Type 5 Steam Chemical Integrator is a device designed to monitor the effectiveness of the steam sterilization process. It contains sensitive chemical substances that react to the combination of time, temperature, and the presence of steam, showing a
visible color change. Its performance simulates the behavior of biological indicators under sterilization conditions.
Scope of use
· Hospitals, clinics, laboratories, and healthcare facilities using saturated steam sterilization.
· Can be placed inside packages, trays, or containers holding medical devices to be sterilized.
Preservation method
· Keep in the original sealed packaging.
· Store in a cool, dry place, protected from direct sunlight.
· Recommended temperature: 10 – 30 °C.
· Relative humidity: 30 – 80 %.
· Keep out of reach of children.

Welcome 24 hours consultation😀😀
Whatsapp/Phone:+86 198 5559 9646
E-Mail: director@otssuperfine.com

20/09/2025

OTS Medical👩‍⚕️
Product Name：Manual Sterilization Reel Cutter
Item NO：OTS-007A
Shell Material：Stainless steel shell
Indentation width：10mm
Sealing width：≤300mm
Working voltage：220V
Power：400 W
Welcome 24 hours consultation😀😀
Whatsapp/Phone:+86 198 5559 9646
E-Mail: director@otssuperfine.com

19/09/2025

OTS Medical👩‍⚕️

Product Name：Manual Sterilization Reel Cutter
Item NO：OTS-007A
Shell Material：Stainless steel shell
Indentation width：10mm
Sealing width：≤300mm
Working voltage：220V
Power：400 W
Size：400×330×170mm/15.7*12.9*6.69inch
Net weight：9kg
Package includes
1*Sterilization Bag Sealing Machine (sterilization bags are not included)

Note:
Please allow 1-3CM differs due to manual measurement.
Due to the different display and different light , the picture may not reflect the actual color of the item. Thanks for your
understanding.

Welcome 24 hours consultation😀😀
Whatsapp/Phone:+86 198 5559 9646
E-Mail: director@otssuperfine.com

18/09/2025

OTS Medical👩‍⚕️
Product name：
OTS120-A: Automatical feeding cutting and sealing machine
OTS121-A: Automatical feeding cutting sealing and printing machine
Item NO：
OTS120-A / OTS121-A
Applicable Industries：
Sealing paper- plastic bags, 3D paper-plastic bags and paper-paper bags.
Function：
AMEF 120:Automatical feeding cutting and sealing machine: Cutting and sealing of paper -plastic pouches can be realized separately or at the same time
AMEF121:Automatical feeding cutting sealing and printing machine: automatically feed, cut, seal the pouches and print out all the selected parameters in Chinese or English
Sealing width (model is optional)：
12mm
Cutting Length：
OTS120-A:at least 80mm
OTS121-A：at least 50mm
Application：
Medical
Automatic Grade：
automatic
Driven Type：
Electric
Power supply：
OTS120-A:110V/220V（+10%~-10%） 50Hz
OTS121-A:110V/220V（+10%~-10%） 50Hz/60HZ
sealing speed：
10(+0.5~-0.5)m/min
seal left side：
0 ~ 35mm adjustable
Working Temperature：
60～220℃ adjustable
Ambient Temperature：
10~40℃
Temperature error：
Less than (+1%~-1%)
Maximum power：
500w
Place of Origin：
China
Brand Name：
OTS
Warranty：
1 Year
Seal strength：
meets BS EN ISO 11607:2006
AC Power：
According to customer requirement
Key Selling Points：
High precision control
Machinery Test Report：
Provided
Video outgoing-inspection：
Provided
Warranty of core components：
1 Year
After-sales Service Provided：
Online Support
Suitable for：
Adjustable fixed-force system, suitable for sealing paper- plastic
bags, 3D paper-plastic bags and paper-paper bags.
Usage：
medical
Welcome 24 hours consultation😀😀
Whatsapp/Phone:+86 198 5559 9646
E-Mail: director@otssuperfine.com

17/09/2025

OTS Medical👩‍⚕️

Product name：
OTS120-A: Automatical feeding cutting and sealing machine
OTS121-A: Automatical feeding cutting sealing and printing machine
Item NO：
OTS120-A / OTS121-A
Applicable Industries：
Sealing paper- plastic bags, 3D paper-plastic bags and paper-paper bags.
Function：
AMEF 120:Automatical feeding cutting and sealing machine: Cutting and sealing of paper -plastic pouches can be realized separately or at the same time
AMEF121:Automatical feeding cutting sealing and printing machine: automatically feed, cut, seal the pouches and print out all the selected parameters in Chinese or English
Sealing width (model is optional)：
12mm
Cutting Length：
OTS120-A:at least 80mm
OTS121-A：at least 50mm
Application：
Medical
Automatic Grade：
automatic
Driven Type：
Electric
Power supply：
OTS120-A:110V/220V（+10%~-10%） 50Hz
OTS121-A:110V/220V（+10%~-10%） 50Hz/60HZ
sealing speed：
10(+0.5~-0.5)m/min
seal left side：
0 ~ 35mm adjustable
Working Temperature：
60～220℃ adjustable
Ambient Temperature：
10~40℃
Temperature error：
Less than (+1%~-1%)
Maximum power：
500w
Place of Origin：
China
Brand Name：
OTS
Warranty：
1 Year
Seal strength：
meets BS EN ISO 11607:2006
AC Power：
According to customer requirement
Key Selling Points：
High precision control
Machinery Test Report：
Provided
Video outgoing-inspection：
Provided
Warranty of core components：
1 Year
After-sales Service Provided：
Online Support
Suitable for：
Adjustable fixed-force system, suitable for sealing paper- plastic
bags, 3D paper-plastic bags and paper-paper bags.
Usage：
medical

Welcome 24 hours consultation😀😀
Whatsapp/Phone:+86 198 5559 9646
E-Mail: director@otssuperfine.com

Anhui OTS Superfine Technology Co., Ltd.

30/09/2025

29/09/2025

28/09/2025

26/09/2025

25/09/2025

24/09/2025

23/09/2025

22/09/2025

20/09/2025

19/09/2025

18/09/2025

17/09/2025

Address

Telephone

Website

Alerts

Contact The Practice

Shortcuts

Share

Category