29/11/2022
1. source system
Maximum output power value: 1.38kW
Main inverter frequency value: 100kHz
Photography tube voltage: 60-92 kV
Photography tube current: 1-15 mA
2. tube
Ball tube model: D-054SB
Nominal focus size: 0.5mm
Maximum anode heat capacity: 35kJ (50kHU)
3.rack
Column lifting stroke: 1000 mm±50 mm
Lifting noise: ≤65dB
Anti-collision protection: yes
Bare metal net weight: 260kg
Bare metal size: 788mm×1090mm×2200mm
Electrical control device size: width 340mm, depth 550mm, height 650mm
4.Working environment of the whole machine
Power supply voltage and number of phases: 220V
Power frequency: 50 Hz±1 Hz
Internal resistance of power supply: should not be greater than 0.44Ω
5.Tablet
Scintillator type: Cesium iodide
Boundary resolution: ≥1.5lp/mm
Pixel matrix: 960×786
Pixel size: 150µm
Imaging time: ≤20s
6.Image acquisition and processing system software
Registration function description: Patient management: registration, search, report, exit
Acquisition function description: Acquisition: Control the acquisition equipment (preparation, start, stop), automatically generate three-dimensional data and store it after the acquisition is completed
Processing function description: Three-dimensional image tools: panorama, density measurement, distance measurement
Two-dimensional image tool: open DICOM image, negative image, horizontal image, vertical image"
Report function description: Viewing: view display of the patient's three-dimensional image, adjust the patient's three-dimensional image display section, adjust the window width/window position of the patient's image
Printing function description: Export, send and burn of DICOM
7.Standard configuration
1 set of main frame
1 set of high frequency X-ray generator
1 set of 24-inch color ordinary LCD monitor
1 set of flat panel detector
1 set of digital acquisition and processing workstations
1 set of electric adjustable beam limiter
Graphical LCD touch screen 1
1 wall-mounted control box
1 electrical control cabinet
8.Features of the whole machine
1.Using a high-end flat panel detector, it has high resolution, low distortion and uniform brightness.
2.Pulse exposure mode is used to activate the X light source only when needed.During the rotation of 18s, the rays lasted only 4-8s, which effectively reduced the inspection dose and reached the international advanced level.
3.The proprietary three-dimensional reconstruction algorithm of the PLX3000 series converts the original two-dimensional sequence projection into a three-dimensional volumetric image, which can provide high-definition tomographic images at any angle and at any location.
4.The panoramic view of the oral cavity is extracted through three-dimensional volumetric images, which can provide high-definition panoramic images.
5.Images can be used to generate reports, print or save as report files.
6.It can provide a variety of filming methods such as standing, sitting and wheelchair.
9.Clinical application：
Oral and maxillofacial cone beam computerized body layer photography equipment (dental CT) with flat panel detectors can be widely used in oral and maxillofacial surgery, orthodontics, orthodontic surgery, implants, dentistry, and TMJ before and after surgery.
