Orcinus

Home
Orcinus

Das Orca System ist das wohl derzeit modernste System zur Temperierung von Prozessen am Markt. Es beruht auf dem Prinzip der Parallel-Verteilung.

18/12/2025

2026 is already on the horizon

Our calendar for next year has been finalized. You will find at some of the most important international plastics shows worldwide.

It will be a great year with many innovations. Stay tuned.

Our team is looking forward to welcoming you at the upcoming events in the new year. Which exhibitions will you be attending?

10/12/2025

🛠 installation on a 2000-ton injection molding machine in France completed 🇫🇷

Last week, we successfully completed another . Focus was on the cold water piping of a 2000-ton injection molding machine. Due to the high requirements, large connection sizes of 1 1/4 inch and 1 inch were used.

Four temperature control circuits on each side of the mold (moving platen and fixed platen) were equipped with our dual ultrasonic sensors. These ensure precise flow measurements and reliable temperature detection for maximum transparency across all relevant process parameters.

We have completed the piping up to the mono couplings, and the customer will install the remaining connections to the mold.

We would like to thank our customer for their trust and our team for their successful work on site.

27/11/2025

𝗳𝘂𝗹𝗹 𝘁𝗿𝗮𝗻𝘀𝗽𝗮𝗿𝗲𝗻𝗰𝘆 𝗶𝗻𝘀𝗶𝗱𝗲 𝘁𝗵𝗲 𝗺𝗼𝗹𝗱

At plastic concept, our orca temperature control is installed directly in the machine bed. We monitor each temperature control circuit individually and rely on the principle of parallel distribution, which ensures stable process conditions and optimized cooling performance.

Thanks to the contactless dual ultrasonic sensors, the flow rate for each circuit is measured digitally and in real time. This enables full transparency, consistent part quality, and reliable production cycles.

26/11/2025

𝗪𝗵𝘆 𝗶𝘀 𝘁𝗵𝗲 orcinus 𝘀𝘆𝘀𝘁𝗲𝗺 𝗺𝗼𝗿𝗲 𝗽𝗼𝘄𝗲𝗿𝗳𝘂𝗹 𝘁𝗵𝗮𝗻 𝗰𝗼𝗻𝘃𝗲𝗻𝘁𝗶𝗼𝗻𝗮𝗹 𝘁𝗲𝗺𝗽𝗲𝗿𝗮𝘁𝘂𝗿𝗲 𝗰𝗼𝗻𝘁𝗿𝗼𝗹 𝘀𝗼𝗹𝘂𝘁𝗶𝗼𝗻𝘀 𝘁𝗵𝗮𝘁 𝗼𝗽𝗲𝗿𝗮𝘁𝗲 𝗼𝗻𝗹𝘆 𝘄𝗶𝘁𝗵 𝗧𝗖𝗨𝘀?

✅ 𝘧𝘶𝘭𝘭 𝘵𝘳𝘢𝘯𝘴𝘱𝘢𝘳𝘦𝘯𝘤𝘺 𝘧𝘰𝘳 𝘦𝘷𝘦𝘳𝘺 𝘤𝘰𝘰𝘭𝘪𝘯𝘨 𝘤𝘪𝘳𝘤𝘶𝘪𝘵
measures flow and temperature digitally in real time for each circuit. You always know exactly what is happening inside your tool.

✅ 𝘤𝘰𝘯𝘵𝘢𝘤𝘵𝘭𝘦𝘴𝘴 𝘢𝘯𝘥 𝘮𝘦𝘥𝘪𝘶𝘮 𝘧𝘳𝘦𝘦 𝘴𝘦𝘯𝘴𝘰𝘳 𝘵𝘦𝘤𝘩𝘯𝘰𝘭𝘰𝘨𝘺
The dual ultrasonic sensors have no contact with the temperature control medium, making the maintenance-free and ideal for clean room and medical applications.

✅ 𝘰𝘱𝘵𝘪𝘮𝘪𝘻𝘦𝘥 𝘤𝘰𝘰𝘭𝘪𝘯𝘨 𝘱𝘦𝘳𝘧𝘰𝘳𝘮𝘢𝘯𝘤𝘦 𝘥𝘶𝘦 𝘵𝘰 𝘪𝘯𝘥𝘪𝘷𝘪𝘥𝘶𝘢𝘭 𝘤𝘪𝘳𝘤𝘶𝘪𝘵 𝘮𝘰𝘯𝘪𝘵𝘰𝘳𝘪𝘯𝘨
Each cooling circuit receives the required flow. This prevents uneven cooling, stabilizes the thermal balance and often reduces cycle times significantly.

✅ 𝘤𝘰𝘮𝘱𝘭𝘦𝘵𝘦 𝘢𝘭𝘢𝘳𝘮 𝘩𝘪𝘴𝘵𝘰𝘳𝘺 𝘢𝘯𝘥 𝘧𝘶𝘭𝘭 𝘮𝘢𝘤𝘩𝘪𝘯𝘦 𝘪𝘯𝘵𝘦𝘨𝘳𝘢𝘵𝘪𝘰𝘯
All deviations are automatically recorded and can be viewed at any time. Integration into the injection molding machine enables central visualization and control.

Modern processes require modern solutions.

18/11/2025

🛠 installation of an orcinus orca plus system in Hungary 🇭🇺

We successfully installed an orca plus temperature control at a global market leader in plastic closures for the food, beverage, and chemical industry. The orcinus orca version offers the operator complete flexibility in controlling the individual circuits.

The includes 16 temperature control circuits and was implemented as a special solution with 3/4-inch hoses connected to the mold. Each circuit is equipped with a control valve in the supply line, allowing the user to choose between flow control and delta-T control.

The operator simply selects the desired flow rate or delta-T on the display. The then automatically adjusts the valve opening so the selected value is reached reliably.

This results in a significant increase in process control: deviations are detected earlier, the molding process becomes more stable, and production becomes more consistent and efficient.

We would like to thank our customer for their trust, and our team for their great work on site. 🙌

13/11/2025

At , the orcinus orca has been in use for more than six years.

Lars Zosel, Head of Process Optimization and responsible for machinery and peripherals purchasing:

“In my opinion, the main advantages of the orcinus orca system are the simplicity of operation, the maintenance-free nature of the dual ultrasonic components, and the excellent service from the entire team.”

23/10/2025

The final day of is over! 🇨🇦

Together with our partners RevoMM and .group, we showcased our temperature control systems and had many inspiring conversations.

Thank you to everyone who stopped by - we’re already looking forward to the next events!

21/10/2025

1️⃣st day at ADM is already running 🇨🇦

Our orcinus temperature control is on display at . Together with our Canadian distribution partner RevoMM, we’re presenting advanced temperature control solutions from and technotrans at booth 605.

📍 Toronto Congress Centre
📅 21 to 23 October 2025

We look forward to exciting discussions and exchanges with visitors from the plastics industry! 🚀

20/10/2025

orcinus live in Toronto 🇨🇦

The starts tomorrow, and we’ll be there! Visit booth 605 to see our temperature control solutions, presented in cooperation with .group & RevoMM.

17/10/2025

orcinus temperature control systems at in Toronto 🇨🇦

From March 21 to 23, we will be presenting our maintenance-free temperature control systems at ADM in Toronto, Ontario. Our Canadian sales partner RevoMM will be represented at the exhibition. The solutions from and .group will be presented at booth 605.

specializes in temperature control systems with digital temperature and flow monitoring. This ensures optimal process stability, high reliability, and improved energy transparency in real time. Complementing this, delivers energy-efficient cooling solutions and temperature-control units that are precisely tailored to the demands of plastics processing.

📅 date: October 21-23, 2025
📍 location: Toronto Congress Centre, Toronto (Ontario), booth 605

We are looking forward to exciting discussions, new contacts and the exchange with visitors at the show!

16/10/2025

thank you for the great time with you all

14/10/2025

is slowly coming to an end 🏁

After several exciting days of inspiring discussions, the K show is now entering its final phase. We’re looking forward to meeting more visitors today and discussing ongoing projects and new applications.

Our orcinus systems can be found at

technotrans (hall 10 / H23)
MATSUI (hall 11 / B35)
tst (hall 1 / A05)
KraussMaffei (hall 15 / C24)
Bole Machinery (hall 15 / A32 & C04)

Visit us – we’re looking forward to the final stretch of K 2025!

Address

Rumburger Straße 3

02742

Opening Hours

Monday	08:00 - 17:00
Tuesday	08:00 - 17:00
Wednesday	08:00 - 17:00
Thursday	08:00 - 17:00
Friday	08:00 - 17:00

Website

http://www.orca-system.com/

Alerts

Be the first to know and let us send you an email when Orcinus posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Practice

Send a message to Orcinus:

Shortcuts

Want your practice to be the top-listed Clinic?

Country:

City: