Fire And Rescue Products New Zealand

17/12/2025

Its getting to that time of year, if you need a top of the line wildfire pump please contact us we are here to help.

17/12/2025

We’re proud to announce that HEN Nozzles can now serve fire departments across New Zealand and Australia through our Authorized Distributor, Fire And Rescue Products New Zealand .

Fire and Rescue Products is a trusted leader in supplying premium firefighting and rescue equipment throughout the region; bringing decades of experience, exceptional service, and strong industry relationships to support fire department’s needs.

This partnership ensures firefighters in both countries can now access the cutting-edge HEN FORCE product line, featuring our patented BLADE pattern technology that delivers unmatched performance, coverage, and control on the fireground.

Innovation. Performance. Safety. That’s HEN.

06/11/2025

Don't forget to come and say hello at the UFBA conference in sunny Christchurch.

23/10/2025

🔥 RANGER LITE – Ready for the Wild. 🔥
Heat-resistant. Durable. Comfortable.
Your gear for wildland firefighting.
🛡️ Kevlar® reinforcements at key zones for extra protection.
🔥 Nomex® fibers shield against flames and heat.
💨 Lightweight & breathable for full mobility.
🧵 Built to last – mission after mission.

06/10/2025

Come down and see us at Fire NZ 2025 conference, stall 55

02/02/2025

🔥 Welcome to 2025! 🔥

Looking for top-notch fire and rescue equipment? Look no further! At Fire and Rescue Products NZ, we are your one-stop shop for all your fire and rescue needs. 🧑‍🚒🚒

From cutting-edge gear to reliable safety equipment, we’ve got you covered. Trust us to keep you safe and prepared in any situation.

Choose Fire and Rescue Products NZ in 2025 – because your safety is our priority!

Fire and Rescue Products NZ is a leading supplier of high quality and dependable firefighting, search & rescue equipment and safety products

05/06/2024

Landing Zone Site Kit

With all the red, blue and white flashing lights at an emergency scene the pi-lit® Landing Zone kit LED’s stand out in stark relief as flashing green. This enables the pilot to immediately see the obstacle-free LZ site. Low profile units that do not get blown away by the copter’s rotowash like cones do.

pi-lit® LZ Kit includes 5 radio-linked flares with both visible and infra-red LEDs. The flares are placed at the corners of a 100 foot (30 meter) square with one placed outside to designate wind direction OR inverted “Y” free of obstacles.

The flares flash in unison to create an identifiable “constellation” of either infra-red or visible flashing points. The operator may use any one of the 5 flares to control the entire group, changing from visible to infra-red with the push of a button.

Features and Specifications
Professional Rechargeable
It is a long established fact that a reader will be distracted by the readable content of a page when looking at its layout. The point of using Lorem Ipsum is that it has a more-or-less normal distribution of letters, as opposed to using ‘Content here, content here’, making it look like readable English.
Powered by Lithium-Ion Rechargeable Battery
6 hour recharge time from a completely dead battery
Standard configuration includes 16 High-Power Visible Green LEDs, 4 High-Power Infrared LEDs (880nm)
36+ hours of continuous flash
Coordinated flashing pattern for easy recognition
Battery status check with push of a button
IP67 water and dust rating
50,000 lbs (26,000 kg) crush strength
Purchase include

Carrying/Charging case, 5 Radio-Connected LZ Flares, 5 Ballasted Range Extender Bases, DC 12/24V Vehicle Plug, 110/240V Wall plug.

https://www.fireandrescueproducts.co.nz/item/portable-landing-zone-site-kit/

04/06/2024

The pi-lit® ‘smart flare’ incorporate an innovative radio-linked network to automatically sequence the flash. Approaching drivers see a sequentially-lit string of flares much like a runway landing strip that guides traffic around the incident or work zone. They are easy to deploy and provide advanced traffic guidance and safety for motorist and road professionals. pi-lit Sequential Safety Flares has now been granted an exemption from the Federal Motor Carrier Administration (FMCSA) to be used as warning device in lieu of warning triangles or fusee flares.

Color Description
Orange Flare Orange Side LEDs/Orange Top LEDs – Orange Plastic
Blue Flare Blue Side LEDs/Blue Top LEDs – Blue Plastic
Red Flare Red Side LEDs/Red Top LEDs – Red Plastic
Yellow Flare Yellow Side LEDs/Yellow Top LEDs – Yellow Plastic
Green Flare Green Side LEDs/Green Top LEDs – Green Plastic
We’ve designed the perfect road safety solution to warn and guide drivers while being able to sustain multiple drive overs. Safe, reliable, rugged, and smart!
Professional Rechargeable

Commuter Alkaline Battery

Features and Specifications
Professional Rechargeable
Will you use these more than once a week? Then you’ll need a rechargeable professional set. Used by law enforcement, fire brigades, utility companies, road assistance services, municipalities, and Departments of Transportation.


Gravity controlled light output: Tilt sensor automatically directs light output to optimize approaching driver awareness
RDS™ (Rapid Deployment System): Automatically turns on flare when removed from the case (Winter gloves? No problem. No buttons.)
“Pair” mode system allows for single or multiple sets to be synchronized
User default stored in memory. Preferred pattern, deployment order, tilt gravity sensor, and more are saved in memory for next deployment.
6 hour recharge time from a completely depleted battery
Battery status check with press of a button.



Automatic synchronization of flares; No programming, no pre-numbering; turn on and deploy; That Easy!
20+ hour runtime (flash pattern dependent)
4 flash patterns to choose from (2 sequential, 1 simultaneous, 1 steady-burn)
Reverse sequence mode: reverse the direction of sequence with a button press (can be deployed walking with or towards traffic flow)
Charge all flares simultaneously (using dual purpose carrying case)
Powered by Lithium-ion rechargeable battery (1500 fully depleted charge cycles)
Kit includes:

Carrying/Charging Case, DC 12/24V Vehicle Plug, AC 110/240V Wall Plug, 2 Year Warranty

Available In:

Set of 10 , Set of 6 and Set of 4.

https://www.fireandrescueproducts.co.nz/item/smart-sequential-road-flares/

31/05/2024

Restube water rescue aid

For first responders doing water rescue operations
The Restube case 1 provides optimal support in rescuing other people in water operations. It contains four Restube automatic which automatically inflate into a Restube buoy when they hit the water. Restube automatic can be thrown to a person in the water from a safe distance and offers helpful buoyancy in a few seconds, to gain valuable time – ideal for first responders. Including interchangeable components for up to 6 releases.

Content:

4x Restube automatic
6x CO2 cartridge (16g)
6 x Water activator
1x Transport case (dust and waterproof, IP67)
Specifications:

Dimensions: 26cm x 24cm x 12cm
Weight: 2.45 kg
Incl. 3-year warranty

It is that compact, lightweight and robust and can be placed always ready at hand. If on a motorbike, a car, on board, attached to a drone or worn. To provide first help it can be thrown to another person. For a drone there are two use cases: First – the flotation can be carried directly to a person with a Restube automatic drop or lay system. Second – the system can be attached to a drone to keep a crashed drone afloat for recovery. Restube automatic is reusable by screwing in a new original 16g CO2 cartridge and the water activator. You can get both in a set.

Inflates with water contact within seconds
Also inflatable by pulling the trigger
Inflatable also with mouth valve
Easy to repack with CO2 cartridge & water activator
Light enough to be thrown far distance
Horizontally and vertically attachable to a belt (not included)
Carriable it by drone (from 900g payload)
Connection for drone drop & lay mechanism at the bag.

https://www.fireandrescueproducts.co.nz/item/restube-case-set-1/

30/05/2024

Northern Diver Inflatable Raft 3.3m

With a 4-Person capacity the inflatable can be used by rescue personnel as an ideal small river/flood rescue raft but it is equally perfect for a day on the lake, whether you are fishing, camping, or just cruising! Lightweight and compact, this inflatable boat is easy to assemble and can be ready for water in no time either in an emergency or just for fun.

Northern Divers 3.3m (10’8) inflatable raft is made from a robust 8cm (3.1”) DWF + commercial grade PVC material, increasing stability and performance whilst on the water.

FEATURES

Overall length: 330cm (130”)
Overall width: 140cm (55.1”)
Internal width: 64cm (25.2”)
Sponson/pontoon dia: 38cm (13.8”)
Floor materials: 8cm (3.1”) DWF + PVC
Weight: 33kg (72.8lb)
Packing dims: 100*57*36cm (39.4*22.4*14.2”)
Chambers: 2 + 1
Max inlet fill (sponsons): 0.35bar/5psi
Stainless steel D-rings: 1 large
Max loading: 500kg (1102.3lb)
Max persons: 4
Recommended outboard: 4HP max or electric
USES

Flood rescue
River rescue
Fishing
Lake paddling
WHATS INCLUDED

Inflatable raft
Hand pump
Paddles
Maintenance kit.

https://www.fireandrescueproducts.co.nz/item/ionic-rescue-path/

29/05/2024

Northern Diver Arctic Survivor Evo Pro 6 Rescue PFD

PFD can be used in all river, lake and ocean environments including aerated moving water, flood waters and surf. Using a personal flotation device (PFD) helps reduce the risk for workers who fall into water or who have to evacuate their vessel in an emergency.

CERTIFICATIONS
EN ISO 12402-5:2020
EN ISO 12402-6:2020
PPE Regulation (EU) 2016/425

FEATURES

Padded adjustable shoulder straps
Strap keeper pockets safely store excess and reduce snag hazards
Internal fail safe system – load tested to 3.2kN
Quick release chest harness
4-way lash tabs (front and rear)
Front mounted cargo pockets (Velcro closure) with plastic D-rings and SOS pealess whistle (EN394 ISO12402) fitted to a retractable lanyard
Internal pockets ideal for housing documents or keeping hands warm
Reflexite® prismatic banding
Single-handed quick release belts with side adjustment buckles
Cowtail (elasticated with reinforced stitching and stainless steel o-ring)
Dual lock carabiner (EN12275:2013, EN362:2004/B)
Removable encapsulated ID panels
Non-slip waist band prevents PFD from riding up when in use
Plastic D-Ring buckles/clip-in points
Removable crotch straps
Reinforced stitching strengthens the PFD in high wear areas
Supplied in drawstring storage bag
OUTER FABRIC
300D polyester (red)
EN ISO 12402-7:09/2006
EN ISO 12402/prA1 08/2007

INNER FABRIC
Buoyant PVC closed cell foam
EN ISO 12402-7:2006/A1:2011 (D)

INTERNAL LINING FABRIC
200D nylon (black)
EN ISO 12402-7:09/2006
EN ISO 12402/prA1 08/2007

SIZING INFORMATION
The following shows sizing for the Evo Pro 6 PFD, if you have any questions our team would be happy to assist you.

MEDIUM
Chest: up to 106cm (42”)
Weight: 76kg (167.5lbs)
Newtons: >100N

LARGE
Chest: up to 116cm (46”)
Weight: 95kg (209.4lbs)
Newtons: 110N

XL
Chest: up to 142cm (56”)
Weight: 115kg (253.5lbs)
Newtons: >120N

Application specific PFD
Swift Water Rescue.

https://www.fireandrescueproducts.co.nz/item/ionic-pro-matrix-buoyancy-aid/

28/05/2024

Northern Diver SF5 Storm Force Rescue Suit | 375D | FE

Our Storm Force 5 Rescue Suit is the latest tri-laminate drysuit that evolved originally from our popular Storm Force 4 Drysuit. This suit is made from a 375D tri-laminate material therefore more hard-wearing than our Storm Force 4 editions.

Using our expertise and years of experience in the design and manufacturing of drysuits, plus our long standing experience working with emergency response teams we have created a drysuit with all of the key features you would require when conducting an on the water rescue at an affordable price!

This a robust, heavy duty drysuit designed for disaster relief, ideal for rescue and emergency response teams conducting any type of marine based rescue whether it be a swift water rescue in a flooding situation or an offshore rescue in the most extreme of conditions.

Other uses can include:
Water rescue, coastguard, sea search and rescue, flood response, river rescue, boating operations, sailing, kayaking, paddle boarding, canoeing, jet and water skiing, land yachting, power boating, fishing – all activities underwater and on the water!

Suit features:
Fabric build: 375D heavy duty tri-laminate
Front entry BDM metal dry zip (medium duty)
Yamamoto neoprene neck and wrist seals
Reflective strips on the cuff and legs
1x Flexi-Light stick arm pocket (left)
1x bellows pocket with Velcro closure (right)
Double layer knee/seat protection
Elasticated ankle gaitors
Latex socks

Suit Branding
You can customize you suit as much or little as you require. Please click here to visit our branding page for more information or contact us to discuss your bespoke needs with one of our team.

Suit Alterations
All suits are fitted with neck & wrist seals, boots or socks – size information is detailed in our sizing charts. We can alter the neck, wrist and boots if you require a specific size that differs from the standard fits. Other parts can be added such as arm and leg pockets. Alterations are chargeable.

https://www.fireandrescueproducts.co.nz/item/ionic-pro-r1-drysuit-neoprene/