VDH Manufacturing, LLC

Home
United States
Frederick, CO
VDH Manufacturing, LLC

We enable space and science exploration, medical marvels, and advanced communications with Swiss-machined components.

Your partner for developing the smallest machined components. Take your critical products to market with a manufacturing partner that’s had a hand in thousands of components that are exploring the solar system, helping doctors save lives, and connecting humans across the world. Precision Swiss Machining

Invented in Switzerland for machining intricate gears for wristwatches, Swiss machines provide higher precision, consistency, and cost-effectiveness on small round parts compared to traditional machines. They are ideal for long, thin, delicate components that require tight tolerances. Unlike a typical lathe, a Swiss machine moves the material through a guide bushing, which fully supports the workpiece during the machining process. From Development Through Production

Lean on our years of industry experience to help you develop parts that can be manufactured to the tightest specs at scale. Whether you’re in the design phase or looking to make a part better, cheaper, or faster, we have the capacity and tenacity to offer rapid prototyping and machine small runs of a few dozen pieces up to tens of thousands at once. ISO 9001:2015 & ITAR Compliant

We are compliant with ISO 9001:2015 standards and will soon have our official AS 9100D and ISO 9001:2015 certifications. We are also partner with a network of post-processors that are NADCAP-accredited and well-vetted.

09/23/2025

Dialed in. Holding tenths in hardened stainless steel.

09/13/2025

Solved! Y2 motor connection was loose. This little DIN connector was not clicked into place, and worked it's way off. I cleaned it, put it on properly, and it works! Now to reassemble, because I took a lot of sheet metal off before I found this.

09/12/2025

S206 just went down, of course right after the service department closes for the week. If anyone has any insight on SOFTTHERMAL alarms and EXCESS ERROR alarms, please reach out, this started mid-production run

08/30/2025

If anyone knows where to get one of these fuses on a Saturday, I would really really appreciate it, the shop currently doesn't have 3 phase power because of it

08/27/2025

Anyone have any tips on breaking a chip in Grade 2 Titanium? I can't show the part, but it's a "dog-bone" part with a long, thin section in the middle, and larger diameters on the end. I've tried different inserts and tools, high speeds, low speeds, high feeds, low feeds, oscillation cutting, high pressure oil, etc. and so far I still need to stop the machine on every part to clear chips. I have a lot of these to do, so really hoping to make the process more reliable.

07/09/2025

Running 80/20 Tungsten/Copper today on some prototypes, this should be very interesting...

05/22/2025

It's finally here!!! New Core One 3D printer just arrived. Have to get some parts shipped to clear some space, but then I can start building. Looking forward to having a new, fully enclosed printer in the shop.

05/05/2025

Haven't posted in a while, but been very very busy. Working on some tiny little pure molybdenum pins today.

03/25/2025

Testing out some new PH Horn boring bars in 17-4 H900 stainless steel. Pretty solid surface finish especially considering I'm running it much more aggressively than the old Micro 100 bars I've been using. This is one of their new boring bars with a built-in chip breaker.

03/14/2025

Happy Friday! Lots of prototypes and challenging short run jobs lately, but for the first time in weeks both machines are running lights out! Feels good

03/13/2025

This Delrin job goes through material so fast that a full bar feeder only lasts about three hours. Working on 3d printing some prototype parts to double the material capacity for this specific job, so I can do more lights-out production

03/01/2025

Anyone have a Freddy Ecovac or something similar they want to sell?? Scooping chips out of a full oil tank is the WORST

Address

3540 State Highway 52, Suite H5
Frederick, CO
80516

Telephone

+17202048042

Website

http://vdhmanufacturing.com/

Alerts

Be the first to know and let us send you an email when VDH Manufacturing, LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Want your practice to be the top-listed Clinic in Frederick?