Schreibeis Built

12/31/2025

27 racked pedals, pedalboard, 4 amps, pre and post effects. All MIDI controlled, all routing configurations available... All careful curated tones.

This rig is capable on so many leveks.. This is just a little bit of the cabling that is packed into the back of this rig.
More soon.

Want to get Built?
Check out our website or DM us for more details.
www.schreibeisbuilt.com

11/21/2025

A few routing interfaces for an upcoming rig milled and ready to assemble. More soon!

11/18/2025

Custom Groove Tubes Soul-O 75 Footswitch we recently sent out.
Detachable cable and smaller size to make it more pedalboard friendly.

We've built a few of these now. Get yours!

www.schreibeisbuilt.com

11/15/2025

Pedalboard we recently built for .
Built to run in stereo or mono, as well as to be used utilizing the dual modeling pedals or real amps. This board covers a lot of sonic territory.

The Nerdy Stuff:
- Built on a elevation series board and utilizing one of there patch bays for easy I/O.

-Power via (2) canvas power supplies. Providing plenty of clean power to run everything.

-.engineering MC6 Pro controller handling MIDI duties. Not only does this control the HX Stomp, but a dual looper mounted under the board that is used to select between the amp sims.

-All Cabling provided by . We've used connectors. and BTPA Cabling for this build.

For more info on getting Built
www.schreibeisbuilt.com
Schreibeisbuilt@gmail.com
Or DM us!

11/13/2025

10/26/2025

A board we did a little while back.

Built to be used in conjunction with a head and a Ambikab cabinet for a wet/dry/wet set up.
It can also be easily run in series, stereo, or wet/dry.
Small and Compact, yet tons of tone.

The Nerdy stuff:
-Built on a board
- connectors, , and cable. All provided by BTPA
-Custom built TRS to TS splitter
- wetter box to provide a parallel effects chain of the stereo wet effects.
-All powered via Zuma PSU
- Output box to handle Isolation, phase, and summing duties when run in a configuration without the Ambikab .

Get your custom rig built:
www.schreibeisbuilt.com

05/13/2025

Here's a Half Rack space Dual A/B unit we built based around the switchback units.

This allows toggling between 2 incoming signals via the heavy-duty toggle switches on the front.

The Nerdy Stuff:
-Half rack size with HD toggle switches

-Bi-Color leds to let you know exactly what channel you're on.

-Toggle switches can be bypassed by simply plugging a cable into the "remote" jack for use with a foot switch or other auxiliary switch.

-Custom power solution to power both switchback units and LEDs with on single power source.

-9VDC input on side of unit for low profile install.

For more info on getting built:

Www.schreibeisbuilt.com.

05/02/2025

Here's a compact board we had come out of the shop recently.

The Nerdy stuff:

-Built on a board for a lightweight compact package.

-Powered via a onespot pro x5 psu.

-Custom I/O on the side and back of the board. Consisting of Guitar in, Amp out, an auxiliary send/return to expand the effects chains, 9VDC 500mA output for auxiliary effects, and a DC input to run the mounted PSU under the board.

-Auxilary loop allows for inserting effects into the chain. When plugged into.

-All cable provided by and . All connectors are and btpa as well.

Small, lightweight lots to offer.

For more info on getting built, please contact us!
www.schreibeisbuilt.com

04/19/2025

Another board we recently sent out.
Very straightforward build aimed at multiple acoustic instruments.

The Nerdy Stuff:
-Built on a resurfaced classic Jr board.

- Zuma provides all necessary power.

-(2) reamp boxes to handle line level to instrument level signal coming from the wireless units via xlr.

-Custom pedaltrain patch panel to consolidate all I/O to the rear of the board.

- and cabling, , btpa, and connectors.

More info on getting Built:
www.schreibeisbuilt.com

04/15/2025

Here's a board we recently finished up!!
Nerdy Stuff below!

The Nerdy Stuff:
-Built on a resurfaced Board. We included a custom wooden top with built-in risers to elevate the back row.

-Custom Rear panels to handle all the required I/O.

-Powered via Zuma

-Line Level RF input is converted to instrumentt level via Reamp

- and cabling

- and connectors

For more info on getting built. Contact us!

www.schreibeisbuilt.com

03/28/2025

Photos From the Bench...

Wrapping this one up just in time for it to hit the road.

More soon!

For more info go to:
www.schreibeisbuilt.com

03/18/2025

Sometimes, things in your rig change. Those specialty cables can be a bummer when they suddenly become unusable due to a new layout or change on your board. We keep that in mind, along with a long list of other things we've learned from years and years on the road.

Get Built:
www.schreibeisbuilt.com