09/08/2025
Intrafix® SafeSet
IV Administration Set with safety features AirStop and PrimeStop
Gravity sets (G) are IV administration sets for gravity infusion.
Pressure set (P) are IV administration sets for gravity and pressure infusions with compatible (non-dedicated) infusion pumps (pressure resistant up to 2 bar acc. to ISO 8536-8)
3-part drip chamber design
With elastic bottom chamber and transparent dome. Allows to see drop forming and constant visual monitoring of the flow rate of infusion solutions.
With Micro-Organism tight air vent filter (bacteria-tight and viral filter efficiency) with closable snap cap. Prevents the risk of contamination while venting the solution container3
With AirStop filter helping to prevent air eintrainment into the infusion tubing and particle retention with >80% filter efficiency for particle size of 3 µm3
With clear and easy to pierce spike, featuring separated fluid inlet and air outlet to reduce risk of air entrainment
Tube
Fluid line from the infusion bottle to the patient.
Soft and clear tubing that allows observance of air bubbles
Standard dimensions: lumen 3 x 4.1 and length 180cm
Roller clamp
Enables fine and flexible adjustment of flow rates
Offers spike protection for safe disposal
With tube dock designed to support handling during priming
Patient Connector
With Luer Lock or screw tight Spinlock adapter to prevent inadvertent disconnection. (refer to available versions)
With back check valve to reduce the risk of back flow (versions with back check valve)
With PrimeStop cap lined with a hydrophobic, bacteria tight membrane that stops fluid leaking and helps to protect against contamination (chemical and bacterial tightness / closed system acc. to NIOSH1; 4; 5)
Material related information
Not manufactured with latex/ natural rubber
Not manufactured with DEHP
Not manufactured with PVC (only applicable for versions with PUR tubing)
Not manufactured with BPA (except IV-Sets with Spinlock adapter, Discofix® stopcock, Discofix® C stopcock, and/or needle-free injection ports)
Duration of use
Duration of use is dependent on the intended therapy according to the SPC of the drug or solution.
In general, change of IV administration sets should occur according national guidelines (e.g. CDC guideline) and/or hospital protocols.
IV administration pressure sets (P) should be changed after 24h at the latest if used with an infusion pump.
Options of standard add-on-devices; for example
Various tubing lengths for e.g. better patient mobility
Tubing material not made with PVC or tubing material UV-protected up to 500nm wavelength to comply with SPCs of corresponding drugs
Infuvalve® back check valve preventing backflow of solutions and blood
Discofix® stopcock or Discofix® C stopcock for needle free injection, aspiration and parallel infusion
Needle-free IV access with SafeFlow® or CareSite® connectors to reduce the risk of needlestick injuries
Time and process efficiency
AirStop feature in drip chamber reduces workload of health care workers (HCW) and enables the user to re-spike into another container
The use of IV sets with PrimeStop cap saves preparation time7
Intrafix® SafeSet helps to reduce the infection and phlebitis rate and to improve the safety of the hospitalized patient7