Aquabiotech Inc.

01/17/2024

Comfortable marine specimens and a satisfied client

This project was part of a facility renovation; our mandate was to replace an existing installation of marine holding trays; the old system though functional was showing its age and required a replacement and modernization.

We worked with the facility personnel to design and fit this system within its specified location; it consists of two parts; the habitat structure and tanks are located within the zoology lab with the filtration and life support equipment within an adjacent prep room. Spatial constrains, through the wall plumbing and availability of required services had to be coordinated between both parties as the installation was done by the facility personnel. Proper planning, coordination and communication made it all work and allowed us to bring this to completion to the clients’ full satisfaction as the following testimonial demonstrates.

“Christopher, thank you to you and your team for making this new system possible for us and bringing life back into our zoology lab. I've never taken on a project like this, and I've learned so much along the way thanks to your ongoing support and patience. Developing this system in conjunction with a renovation was convenient in some ways but did come with its share of delays and complications. I truly appreciate your understanding and helpful communication throughout this process.
We’ve never had a marine system this advanced in our biology department, it will be used daily going forward and will be a great resource for both teaching labs and expanding our research capabilities. Not to mention a relaxing water feature and a peaceful spot for staff and students to take a break from their stress and observe and appreciate some wonderful little critters.

You and your team did some excellent work in designing this for us and I’m very grateful we found such a reliable, knowledgeable company for such a niche project.”

Dallas, Thompson Rivers University
Laboratory technician

12/21/2023

🎄🌟 Holiday Break 🌟🎄

Dear Clients, Partners, and Friends,

As the year comes to a close, we want to take a moment to express our heartfelt appreciation for your trust and collaboration.

Please be advised that our offices will be closed for the holiday season from December 23rd to January 8th. During this time, our team will be taking a well-deserved break to celebrate the festive season and recharge for the new year.

We wish you all a very Merry Christmas filled with joy and surrounded by loved ones. May the New Year bring you prosperity, good health, and countless opportunities for success.

Thank you for being a part of our journey. We look forward to continuing our collaboration in the new year.

Warmest regards,
The Aquabiotech Team

12/08/2023

The Cap Dauphin fishermen’s Coop has been successfully operating Aquabiotech Eco-Lobster Condo systems for some 15 years now. Originally these were added as a retrofit project to expand the carrying capacity of their existing pounds, improve lobster health and counter high summertime water temperatures that are more and more frequent with the changing climate.

As our technology has been proven to be functional, reliable, and cost effective in solving their storage and temperature control needs they have over the years expanded to maximize their holding capacity within the existing facility. Limited by the existing space and with fishermen looking to join the fishermen’s coop they decided to go ahead with a major expansion; always with Aquabiotech as their technology partner. A new purpose-built building was constructed to house our industrial scale Eco-Lobster Condo systems, ultimately the expansion added 600 000 lbs. of holding capacity, nearly doubling the cooperatives lobster holding capacity to 1,200,000 lbs. The Co-op is now among, if not the largest lobster holding facilities in eastern North America and likely the world.

We at Aquabiotech are proud of the relationship that has evolved between the fisherman’s Co-op and our company. The road traveled from the original lobster pounds to the present-day facility has been a long one that has been accomplished over many phases, the partnership continues to this day with other projects in the works.

You have a lobster holding project in mind; why settle for a supplier when you can have a long-term partner to carry your vision forward?

Here is a short video by the Cap Dauphin Fisherman’s Co-op showcasing their installations, lobster quality and Aquabiotech’s contribution to their success.

Cap Dauphin fishermen's Cooperative live lobster facility.Grosse Ile, Magdalen Islands,Quebec, Canada418-937-8157

11/21/2023

Aquabiotech custom designed marine specimen habitat system. Thompson Rivers University, Kamloops, BC

This project was part of a facility renovation; our mandate was to replace an existing installation of marine holding trays; the home-made system though functional was showing its age and required a replacement and modernization.
We worked with the facility personnel to design and fit this system within its specified location; it consists of two parts; the habitat structure and tanks are located within the zoology lab with the filtration and life support equipment within an adjacent prep room. Spatial constrains, through the wall plumbing and availability of required services had to be coordinated between both parties as the installation was done by the facility personnel. Proper planning, coordination and communication made it all work and allowed us to bring this to completion to the clients’ satisfaction.

10/25/2023

Aquabiotech Biofilter Inoculation Station and new lobster holding system at the Métro distribution centre.

We recently finished the installation of the new lobster containment system in the brand-new state of the art distribution centre of the Métro Grocery chain in Terrebonne, Qc. This system can house 2200lbs of lobster for short term holding. This facility is not ocean side, seawater is made on site using an Aquabiotech designed saltwater mixing system.

The holding system is currently being prepared to receive it is first tenants. To inoculate the biofilter an Aquabiotech Biofilter Inoculation Station “BIS” has been deployed to the clients’ location. This automated system fully inoculates the biofilter media over the course of several weeks; ammonia, nitrate and nitrite measurements, data logging, chemical mixing and dosing are fully automatic. Saving the operator many work hours over the course of the process.

The Biolfilter Inoculation Station is only available from Aquabiotech; if you have an application requiring safe pre inoculated biofilter media, contact us for more information. Pet shops, wet laboratories, public aquariums and of course lobster holding facilities are all likely to benefit from the use of our inoculation stations.

10/04/2023

https://www.aquabiotech.com/wet_lab_equipment/multi-tank-systems

Advanced Zebra Fish, Xenopus and Multi-rack holding systems.

We have partnered with Iwaki Aquatics Systems and Services to offer our customers these advanced, full featured aquatic research systems. Be it a single unit for use in an academic setting or dozens for advanced genetics studies in large medical facilities; these feature rich systems are sure to meet and exceed your expectations.

Standard advanced features include:

· Remote monitoring and control

· Email or SMS alerts when parameters are out of range.

· Automatic data-logging, up to 90 days with 15-minute sampling intervals

· UV sterilizer

· Self-cleaning tanks

· Variable speed pumps with Constant Flow Technology to maintain pressure.

· (Option) Can be outfitted with Feederbot automated feeder system that scans, feeds, records, and tracks all your wet and dry feeding needs.

Contact us for more information today.

09/27/2023

https://www.aquabiotech.com/titanium-heat-exchangers

Large Exhibit and Lobster Livewell Titanium Heat Exchangers by Aquabiotech

We are happy to bring to market our new high-quality line of titanium heat exchangers. Designed for large aquatic exhibit and lobster containment system temperature control. These units feature a titanium U-tube design in a 10" diameter shell, 5 or 10 feet in length. They are well suited for water to water and direct expansion cooling applications in harsh environmental conditions.

09/14/2023

Aquabiotech Quarantine Holding Tank for the Montreal Biodome

We recently built and delivered a quarantine holding tank for the Biodome of Montreal, part of the Space for life network of museums that include Biodôme, Biosphère, Jardin botanique, Insectarium and Planétarium.
This is a stand-alone Recirculatory Aquaculture System (RAS) with complete water recycling, this unit will be useful to hold new arrivals destined to the aquatic habitats through their quarantine period, will allow the segregation of fish and aquatic animals that require particular care and will also serve for the temporary holding of specimens.

08/31/2023

Lobster chilling in the Sonora
This spring we had the pleasure of collaborating with the folks at the Phoenix, AZ location of the Pier 22 Seafood Co., a division of Shamrock Foods, on the installation of a new, closed containment lobster holding system. The system is designed to be compact with a reduced footprint; it can hold up to 1000 lbs. of lobster in a cabinet with trays at a low temperature and allows for both short- and long-term storage. The installation includes all the equipment required to manufacture seawater on site.
With the right system and Aquabiotech as a partner, live lobster can be housed anywhere. If you have a lobster holding project, contact us, we have solutions. If the proper conditions for live lobster, can be created in the Sonora desert some 200+ miles from the ocean; we are confident we can do the same for you.

06/16/2022

It is with deepest regrets and great sadness that we must announce the recent passing of Hélène Drouin, founding partner & president of Aquabiotech Inc. Following a long, valiant fight with cancer Hélène passed from this plane of existence on to the next on May 30th, 2022, she was 68 years old. Her incredible courage, determination and strength of character allowed her to face the challenges that three and a half years of disease imposed on her head on; to ultimately flout the original prognosis that gave her only months to live.

A celebration of her life was held on June 12th; family, friends, colleagues and many others upon whom she had a positive influence were present to commemorate her life and offer their support to the family in this difficult time.

For many clients and partners Hélène was likely the face and voice of Aquabiotech; & of course her passing will force some changes upon our business, our structure and our personnel’s responsibilities. However, please know; we remain committed to our clients, their projects and needs. We intend and are determined to honor Hélène by continuing and advancing her life’s work, our company Aquabiotech Inc.

12/07/2021

Cap Dauphin Fishermen's coop on the Magdelen Islands in Quebec has partnered yet again with Aquabiotech to expand their lobster holding capacity. Our companies have been working together since 2011, over this period the coop's holding capabilities have gone from 200K lbs to approximately 600k lbs with the help of Aquabiotech's expertise. With this new expansion the Cap Dauphin fishermen will be able to lodge in excess of 1 million lbs of live lobster at any given time.

Cap Dauphin Fishermen's Coop. Semi-closed system designed to purging, seasonning and lobster mi-term storage for a period up to two months.

06/29/2021

Live lobster holding tank system built and installed by Aquabiotech this spring (2021) for Les Pêcheries Desbois, Québec city, Québec, Canada.

Vivier à homard fabriqué et installé au printemps 2021 par Aquabiotech pour Les Pêcheries Desbois, Québec, Qc

05/12/2021

Un article sur Aquabiotech est paru dans la r***e IMMO; magazine spécialisé dans les domaines de l'architecture et de la construction au Québec. L'article comprend des photos du nouveau laboratoire de recherche aquatique conçu par Aquabiotech pour l'université Concordia.

https://issuu.com/francegoyet/docs/inno_magazine_35/46

Magazine spécialisé dans le domaine de la construction et de l'architecture du grand Montréal et du Québec

05/12/2021

Aquabiotech has been featured in IMMO magazine, a French language quarterly about the construction and architecture industries. The article features photos of the newly completed aquatics laboratory at Concordia's Applied Science Hub.
https://issuu.com/francegoyet/docs/inno_magazine_35/46

Magazine spécialisé dans le domaine de la construction et de l'architecture du grand Montréal et du Québec

05/12/2021

Aquabiotech is proud to announce the completion of Concordia’s new aquatic research laboratory; part of the university’s newly built Applied Science Hub.

Aquabiotech’s role in this project was extensive spanning from the design of research areas, the commissioning and manufacture of the aquatic habitats and research equipment; including rigorous quality control, right through final installation and ultimate delivery of the laboratory.

The Concordia aquatic laboratory features many of Aquabiotech’s specialized proprietary research units. Highly efficient re-circulatory aquaculture systems, multi stressors, holding tanks, artificial rivers “flume”, and environmental control systems for heating and cooling as well as centralized data-logging and system management are among Aquabiotech contributions to the new aquatic research laboratory.

We at Aquabiotech are honored to have been selected by the University for this Project and are very proud of the finished product.

10/26/2019

2019-10-26 The new Aquatic Laboratory at the University of New Brunswick in Fredericton is now functional.

10/15/2019

October 2019: Concordia University'snew Science Hub are near completion. Aquabiotech will install all equipment for aquatic research.

The new space(LEED Gold certification), has been designed to physically connect researchers between spaces, encouraging interdisciplinary collaboration and research. It will house laboratories and research spaces supporting research fields such as agriculture, health and sustainable development.

https://www.concordia.ca/news/stories/2018/05/09/construction-begins-on-concordia-universitys-state-of-the-art-science-hub.html

http://www.concordia.ca/maps/buildings/science-hub.html

04/08/2019

ASSEMBLEUR d'ÉQUIPEMENTS POUR LA RECHERCHE ET LE DOMAINE DES PÊCHES. Si vous préférez un travail diversifié à un emploi routinier et aimez le travail bien fait, cet emploi pourrait être pour vous! C’est un travail exigeant, mais stimulant qui s’apparente à celui d’un artisan. Notre équipe de biologistes et de techniciens conçoit et fabrique des systèmes de filtration et de recyclage de l'eau pour le maintien d’animaux marins en aquariums ou bassins spécialisés. Ces équipements sont surtout conçus pour étudier l’effet de l’environnement, tel le réchauffement climatique, sur la vie aquatique. Nous construisons également des viviers à homard d’envergure industrielle. Les équipements que nous assemblons comprennent des bassins, des pompes, des filtres à eau, la plomberie (tuyaux, raccord, valves ) et des appareils de contrôle électronique. Voir le site Internet pour plus de détails.

Une grande précision est demandée dans les coupes (tuyauterie et feuille) et pour l’assemblage des différentes composantes. Sous la supervision du directeur de l'atelier, vous procédez au montage de ces unités et à leur mise en fonction selon les directives et méthodes reconnues et dans le respect des politiques en vigueur. C’est un travail d’équipe stimulant et créatif.

Vos fonctions :
-Prendre connaissance des travaux à effectuer en lisant les bons de travail et interpréter les dessins.
-Régler et ajuster les équipements ou les machines afin d'effectuer des opérations.
-Prendre des mesures avec précision.
-Réaliser les pièces ou les composantes selon les spécifications et techniques reconnues.
-Vérifier le résultat de ses travaux à l'aide d’instruments tels que micromètres, de compas et d'autres instruments de mesure de précision.
-Procéder à des assemblages de composantes en respectant les plans et spécifications.
-Effectuer l'entretien routinier des machines et équipements selon les directives.
-Réaliser des travaux d’entretien des espaces de travail selon les besoins.
-Réaliser des tâches de réception des matières premières et/ des marchandises selon la procédure.
-Participer à la préparation des produits à livrer (emballage, manutention).
-Compléter les documents de production selon les procédures et directives établies.
-Organiser son poste de travail de manière à être facilement remplacé en cas d’absence imprévue.
-Assumer toute autre tâche reliée à sa fonction au besoin ou à la demande de son supérieur.

Niveau d'études : Diplôme d'études secondaires (général) (DES)Terminé
Années d'expérience reliées à l'emploi :3 à 5 années d'expérience

Description des compétences : Bien que le matériau de base soit le plastique, plusieurs des techniques associées à l’ébénisterie doivent être maîtrisées. Vous devez donc être familier avec les outils courants d'un atelier d'ébénisterie (perceuse, banc de scie, toupie, niveau, scie à onglet, tour (non essentiel). Lecture de plan. Capacité de travailler en adoptant différentes postures de travail. Capacité de soulever des charges pouvant atteindre 25 kilos. Excellente habileté manuelle. Engagement et loyauté. Souci élevé pour la rigueur, la précision et la qualité du travail. Possession d'un passeport valide. - Bonne perception en 3 dimensions - Une bonne autonomie - Sociable, sérieux et responsable
Langues demandées : langues parlées : français
langues écrites : français
Autres langues ou précisions : La connaissance de l'anglais est un atout.
Salaire offert : selon expérience de : 16,00$ à : 17,50$ - de l'heure
Nombre d'heures par semaine : 40,00

Conditions diverses : Horaire flexible: 40 heures sur 4.5 jours pour un congé le vendredi après-midi. - bottes de travail fournies (après la période de probation de six mois). - Congés de maladie payés (3 jours sur une période d'une année). Ce travail varié et stimulant vous permettra de voyager à travers le Québec, le Canada et quelque fois à l’international pour l’installation des équipements chez les clients. Ces voyages occasionnels et nécessaires peuvent durer entre 4 à 15 jours consécutifs.