KOMEG Technology Ind Co.,Ltd

KOMEG Technology Ind Co.,Ltd KOMEG Technology Industrial is famous for its KOMEG star brand of environmental test equipment in Ch

Difference between 2 zong and 3zong shermal shock chambers
01/07/2022

Difference between 2 zong and 3zong shermal shock chambers

Happy weekend!
09/04/2022

Happy weekend!

Happy Mid-Autumn Festival~
21/09/2021

Happy Mid-Autumn Festival~

Highly Accelerated Life Aging Test It is widely used in IC semiconductors, connectors, circuit boards, magnetic mater...
03/09/2021

Highly Accelerated Life Aging Test
It is widely used in IC semiconductors, connectors, circuit boards, magnetic materials, polymer materials, EVA, photovoltaic modules and other related products for accelerated aging life test.

34 cubes walk-in Our Walk-in use urethane-foam panels in a stainless steel or galvanized interior skin. This Walk-in...
02/09/2021

34 cubes walk-in
Our Walk-in use urethane-foam panels in a stainless steel or galvanized interior skin. This Walk-in Chamber is same construction used for walk-in in , but of a higher quality.

This series of aging test is suitable for the reliability test of industrial products. It has the characteristics of t...
31/08/2021

This series of aging test is suitable for the reliability test of industrial products. It has the characteristics of temperature control precision and wide control range. The performance conforms to the criteria GB5170.1.2.5-2017 "High-temperature test equipment for basic parameters verification method of environmental test equipment for electric and electronic products.

Rapid temperature change are very powerful climatic chambers used to perform hot and cold cycles with steep temperatur...
30/08/2021

Rapid temperature change are very powerful climatic chambers used to perform hot and cold cycles with steep temperature gradients(from 3 to 15°C/min depending on the temperature ranges)

Salt spray test (Salt spray test chamber, salt box, salt spray test machine, salt spray corrosion test chamber) can ...
30/08/2021

Salt spray test (Salt spray test chamber, salt box, salt spray test machine, salt spray corrosion test chamber) can be used to assessing the ability of salt spray corrosion resistant materials. It can be used to assessment materials and their resistance to salt spray corrosion protection layer capacity, whether you are testing hardware industry, screw industry, electroplate industry, automotive and motorcycle parts, communication industry, computer industry, electronic industry, coating industry, research institution, etc, our salt spray test chamber can offer you a best solution.

Thermal Shock Test is used to test the capability of material structure or composite materials to withstand the contin...
25/08/2021

Thermal Shock Test is used to test the capability of material structure or composite materials to withstand the continuous environmental changes between extremely high temperature and low temperature during a short time, and therefore understand the chemical changes or physical damages caused by expansion from heat and contraction from cold in the shortest possible time. It is applicable to metals, plastic, rubber, auto parts, chemical materials, electronics and other materials. The test results can be used as a reference or basis for product improvement.

KOMEG Technology Industrial established 1990, more than 30 years specialized in electromagnetic vibration test machine, ...
23/08/2021

KOMEG Technology Industrial established 1990, more than 30 years specialized in electromagnetic vibration test machine, climatic test chambers, thermal shock test chambers, walk-in chambers, burn-in room and aging test chambers, drying ovens, salt spray testers, medical laboratory equipment etc. Marketing covers more than 70 countries, provided reliability testing services and tech support for more than 10,000 enterprises. Specially successful cooperation with Magna/Sumsung/ BYD/ Foxconn /Gree/LG/SGS/Siemens/ Hisense/Qing Hua University/Bei Jing University. KOMEG factory located in Dongguan City, covering an area of 10,000 sqm, with over 100 employees including 30 R&D engineers and 30 marketing people. Passed ISO14000 Certificate, Products Certified CE, FCC and More Certificate.

Temperature and Humidity Equipment, Battery Machine Test, Equipment
23/08/2021

Temperature and Humidity Equipment, Battery Machine Test, Equipment

Salt spray chamber can be used to the simulated condition that more often meet at the natural environment, and then dete...
28/07/2021

Salt spray chamber can be used to the simulated condition that more often meet at the natural environment, and then deteriorated the natural environment to be tested, such as the salt spray, dry, wet, room temperature, low-temperature environment, it can be tested in any order or individually tested. Applicable fields including automobile parts, aviation equipment, photographic equipment, building materials, electricity, electrical and electronic systems.

Drying Oven / KOV-1500Accelerated aging is testing that uses aggravated conditions of heat, humidity, oxygen, sunlight, ...
22/07/2021

Drying Oven / KOV-1500
Accelerated aging is testing that uses aggravated conditions of heat, humidity, oxygen, sunlight, vibration, etc. to speed up the normal aging processes of items. It is used to help determine the long-term effects of expected levels of stress within a shorter time, usually in a laboratory by controlled standard test methods. It is used to estimate the useful lifespan of a product or its shelf life when actual lifespan data is unavailable. This occurs with products that have not existed long enough to have gone through their useful lifespan: for example, a new type of car engine or a new polymer for replacement joints.

Walk in climatic chamber was widely used for large components, assemblies, and finished products.both Panel Walk-In Cham...
18/07/2021

Walk in climatic chamber was widely used for large components, assemblies, and finished products.both Panel Walk-In Chambers and Solid Walk-In Chambers available

3-ZONE THERMAL SHOCK TEST / KTS-500ＢThermal Shock Test Chamber is used to test the capability of material structure or...
13/07/2021

3-ZONE THERMAL SHOCK TEST / KTS-500Ｂ
Thermal Shock Test Chamber is used to test the capability of material structure or composite materials to withstand the continuous environmental changes between extremely high temperature and low temperature during a short time, and therefore understand the chemical changes or physical damages caused by expansion from heat and contraction from cold in the shortest possible time. It is applicable to metals, plastic, rubber, auto parts, chemical materials, electronics and other materials. The test results can be used as a reference or basis for product improvement.

includes mechanical vbration test machine and electromagnetic vibration test machine
09/07/2021

includes mechanical vbration test machine and electromagnetic vibration test machine

Address

Building 12, Songshan Lake, Small And Medium-Sized Science And Technology Park
Dongguan
523808

Telephone

+8676923321820

Website

Alerts

Be the first to know and let us send you an email when KOMEG Technology Ind Co.,Ltd posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Practice

Send a message to KOMEG Technology Ind Co.,Ltd:

Shortcuts

Share

Category

About us

A 27-year specialist in advanced environmental test equipment

KOMEG Technology Industrial is famous for its KOMEG star brand of environmental test equipment in China since 1990.KOMEG has specialized in climatic test chambers,thermal shock test chambers,walk-in chambers,burn-in room and aging test chambers,drying ovens,salt spray testers,medical laboratory equipment etc.KOMEG factory is located in Dongguan,covering an area of 5,000 sqm,with over 100 employees including 26 R&D engineers.KOMEG also have offices in Shenzhen and Songshan Lake National Hi-Tech Industrial Development Zone.

Born for quality,test for future

Born for quality,test for future is always our philosophy.Better idea,better design and better quality is our aim.KOMEG strive for continuous innovation,releasing no less than 5 new designs each year.Our strong R&D team and skilled workers is the key to our success.No matter it is standard or custom-made project,we have rich experience in handling such so that customers worldwide can benefit more from KOMEG when working with us.And to ensure your specific test standards are met,the key components and parts are using imported famous brand.Thats why SGS,KONICA MINOLTA,SENKO,Midea,TCL and Huawei are among our long-term clients.