10/04/2026
9 Minuten - so viel Zeit spart man bei nur einer Messung von pH und Chlorwerten mit dem LILIAN gegenüber einem klassischen Photometer.
Das LILIAN benötigt nur 1 Minute für die komplette Probenvorbereitung, Messung und Dokumentation. Beim klassischen Photometer dauert die Messdurchführung mindestens 6 Minuten, davon entfallen allein 1-2 Minuten Wartezeit auf die Gesamtchlormessung. Hinzu kommen ca. 4 Minuten für die Dokumentation und das Reinigen des Messbestecks. Das ist bei LILIAN nicht nötig.
9 Minuten - klingt nach nicht viel? Über 20 Mio. Poolparameter wurden mittlerweile von Schwimmbädern, Hotels und Laboren in ganz Europa mit LILIAN Messgeräten bestimmt. Das sind 5 Mio. SensoSticks - und bei jeder Messung wurden 9 Minuten gespart! Das sind 750.000 Stunden (also 86 Jahre!), in denen nicht Tröpfchen gezählt oder Tabletten zerstampft werden mussten.
Gern geschehen. 😉
---
9 minutes – that’s how much time you save on a single pH and chlorine measurement using the LILIAN compared to a traditional photometer.
The LILIAN takes just 1 minute for the entire sample preparation, measurement and documentation process. With a traditional photometer, the measurement takes at least 6 minutes, of which 1–2 minutes are spent waiting for the total chlorine measurement alone. On top of that, there are approx. 4 minutes for documentation and cleaning the measuring equipment. This is not necessary with LILIAN.
9 minutes – doesn’t sound like much? Over 20 million pool parameters have now been measured by swimming pools, hotels and laboratories across Europe using LILIAN measuring devices. That’s 5 million SensoSticks – and 9 minutes saved with every measurement! That’s 750,000 hours (or 86 years!) spent not counting drops or crushing tablets.
You’re welcome. 😉