17/09/2025
✨ New to Arc4Health? Here’s how to get started in no time:
1️⃣ Place the delivery unit into the pouch on the strap, connect the wire to the port at the base of the delivery unit.
2️⃣ Attach either the carbon rubber pads or the conductive pads to the poppers on the inside of the strap. If using the carbon rubber pads add a small amount of conductive gel to each pad.
3️⃣ Attach the strap to either your upper arm or your lower leg. (It does not need to be placed near the problem area as it has an effect on the whole body)
4️⃣ Turn it on by holding down the left hand button for 3 seconds.
5️⃣ Select a programme using the same button, but with a quick press and release this time.
6️⃣ Press PLAY (this is the most commonly missed step..) using the right hand button, again a quick press and release this time.
Both the right hand button and the programme LED indicator should light up green if connected to the skin, if there is no connection it will be an amber light. Once you have the green light you're good to go! The LED will continue to flash for the remainer of the three hour programme and all other lights will turn off.
Once it's completed the cycle it will turn itself off! 🧡
✅ Simple. Portable. Effective.
💡 Tip: Always start with Program 1 when beginning your Arc4Health journey. And contact our friendly team if you have any questions!