Kentec Training Ltd

18/09/2025

Our CITB Health & Safety Awareness Course provides training to aid the understanding of potential hazards the construction worker may face on site. This 1-day course is an ideal foundation for those wishing to obtain an industry accreditation card and dives into a summary of health, safety, welfare and environmental issues, identifying the delegate’s responsibility for looking after themselves and others; outlining the employer’s duties; and explaining what should be done if the worker thinks that anyone’s health and safety is being put at risk.

Get training you can trust with Kentec!

🔗 Book online today: https://buff.ly/cfxDIZk

17/09/2025

Our IPAF Operator Novice Course provides training to prepare and safely operate Mobile Verticals (Scissorlifts) and Mobile Booms (Cherrypickers) in the workplace, and is ideal for operators with little to no prior experience using MEWPs. This novice course allows for additional practice time on the MEWP's in the afternoon of day one of the course, with the practical assessment taking place on the morning of the following day.

The IPAF (International Powered Access Federation) certification is an internationally recognised qualification for use of such machinery. As an approved training centre, Kentec Training is audited by IPAF annually and are one of the leading work at height training providers in the southeast.

Get training you can trust with Kentec!

🔗 Book online today: https://buff.ly/j9i1Nrh

16/09/2025

Our Safety Harness Essentials Course provides training on the vital information and understanding on how to identify and use safety harnesses, lanyards, anchor points and general associated equipment and carry out a pre-use inspection.

This course was created in association with a leading UK manufacturer to provide the essential knowledge required for the selection, wearing, using and the pre-use inspecting of Safety Harnesses, Lanyards and associated accessories while working at height.

Get training you can trust with Kentec!

🔗 Book online today: https://buff.ly/BoeR8s4

15/09/2025

Our Harness - Rooftop Safety Course provides training on the vital information and understanding on how to identify hazards and reduce the risks of working at height on pitched, flat, spire, trussed or curved roofs.

This course is aimed at personnel who are involved in working on, pitched, flat, spire, trussed or curved roofs. With emphasis being on the safe use of the many types of anchor systems that may be used. This course also includes the pre use inspection and correct fitting of fall arrest harnesses. Operatives will gain a thorough knowledge of the difference between fall arrest and fall restraint.

Get training you can trust with Kentec!

🔗 Book online today: https://buff.ly/GTPsWWg

14/09/2025

Our PASMA Towers for Users course will equip you with the specialist knowledge and skillset you need to work safely with mobile access towers, such as how to safely assemble, dismantle, alter, inspect and move them.

Get training you can trust with Kentec!

🔗 Find out more: https://buff.ly/orDXXsv

13/09/2025

We believe that a proactive attitude to training and development is the best investment that can be made to ensure success for the future and a return on investment.

With the increased enforcement of legislation and regulations in the work place, every employer has not only a legal obligation to training their employees, but a moral one - and will find the proof of competence through training a requirement to continue operating within some industries.

For more information, please browse our site and explore the range of courses and services available here: https://buff.ly/vkcNvmX

Get training you can trust with Kentec!

12/09/2025

Our NEBOSH National General Certificate in Occupational Health and Safety course is one of the UK’s most popular and respected health and safety qualifications. Offering a valuable overview of the core aspects of occupational health and safety, the course provides an excellent platform for individuals who are looking to build upon their knowledge and skills and take their career forward.

Delegates will gain a thorough knowledge of health and safety legislation and its practical applications during the course. They will learn how to spot workplace hazards and how to prevent them, as well as to assist in your company’s safety management programme. The course results in a real return on investment by giving you the know-how that could help you to reduce insurance and sickness-absence costs, improve staff morale, behaviours and minimise the potential for prosecution or other enforcement action.

Get training you can trust with Kentec!

🔗 Book online today: https://buff.ly/eIt4iGX

11/09/2025

Our CAT and Genny Operator course provides the essential knowledge needed to safely and correctly operate a Cable Avoidance Tool (CAT) along with a Signal Generator (GENNY) when tracing underground services to meet the guidance from HSG 47 for Avoiding Danger from Underground Services.

The course involves hands on use of the actual locators to detect and trace the route of buried underground services. This will cover the different types of buried services that exist, current legislation and best practice concerning detecting buried services, the safety implications of not using a locator and associated ancillary equipment, use of local utility plans, observation of evidence in the street etc.

Get training you can trust with Kentec!

🔗 Book online today: https://buff.ly/vIb0iUN

10/09/2025

Our IOSH Managing Safely Course provides training on how to control their workforce in accordance with current health & safety regulations and best practice. This course will develop each delegate's understanding of legal, moral and social duties of sector supervisors, managers, directors and business owners.

Delegates will also gain the knowledge and tools to tackle the safety and health issues they’re responsible for and learn practical actions they need to take. Importantly, Managing Safely makes a powerful case for safety and health being an integral part of day-to-day management and business.

Get training you can trust with Kentec!

🔗 Book online today: https://buff.ly/bV2kMFl

09/09/2025

We have places available on our upcoming QualSafe Emergency First Aid At Work (RQF) Course!

📅 29/09/2025 | 📍 Ashford, Kent | 🕛 08:30 - 16:30 | 💷 £145.00 Per Person

This 1-day course provides delegates with the skills and knowledge required to deal with first aid situations in low-risk workplace environments for the purposes of the Health and Safety (First-Aid) Regulations 1981, and is ideal for anyone wishing to become an emergency first aider.

Get training you can trust with Kentec!

🔗 Book online today: https://buff.ly/94XdYDB

Our 1 day Emergency First Aid At Work Course provides at least 6 hours of classroom based theory & practical instruction to deal with workplace emergencies.

08/09/2025

We have places available on our upcoming L.A Ladder & Stepladder User & Inspection Course!

📅 26/09/2025 | 📍 Ashford, Kent | 🕛 08:30 - 16:30 | 💷 £185.00 Per Person

This 1-day course provides training for users, supervisors and managers wanting to equip themselves with the knowledge, skills and confidence necessary to use and formally inspect ladders and step ladders legally and safely. Written with the guidance from the UK's leading experts on ladder manufacture, maintenance and safety, the Ladder Association scheme addresses all the issues raised by the Health and Safety at Work Act 1974, Provision and Use of Work Equipment Regulations 1998 and, more recently, the Work and Height Regulations 2005.

Get training you can trust with Kentec!

🔗 Book online today: https://buff.ly/lb2WHYD

Inspecting ladders & step ladders to ensure they are safe is an important part of ensuring safety when working at height. This course provides training on the safe use and inspection of ladders.

08/09/2025

🎉 Kentec Training is officially 17 years old! 🎉

Since opening our doors on 8th September 2008, our journey has been one of steady growth, shaped by a fantastic team of passionate instructors and staff who deliver quality service with the human element always remaining front and centre in everything we do.

Our story, however, goes back even further — from humble beginnings as a draughting company in the 1980s, to running a high street tool hire business throughout the 90s and early 2000s, before evolving into the dedicated training provider we are today.

We’ve stayed true to our core values, expanded our reach by opening our second training centre in Ashford, and continued to push the standard of health and safety training higher and higher all across the UK.

None of this would have been possible without our amazing dedicated team, our trusted partners, and the tens of thousands of delegates who choose to train with a long-standing training provider like us year on year.

Here’s to 17 years of Kentec Training – and many more ahead!