LEARN.........
We are also involve in Manufacturing of diffrent Pollution control units. like :
Wood Based Cremation System - Swarahantra
Swarahantra is from “ Swarg Rah Yantra” it means ‘A machine, takes Souls to Heaven ’. This is a Eco-friendly way to Cremate a Dead Body with wood Consumption Approximately 25% (110 Kg). Which can fulfill the Need of Recent Problem associated with the Dead Body cremation in INDIA. In this all the rituals followed by Hinduism, Sikhism, Jainism etc. It is Designed in such a way so that maximum heat evolve from the burning of wood is utilized for cremation of the dead body (i.e. Maximum Combustion Efficiency) and air input is as per requirement for complete combustion & controlled so that less Suspended Particles in Flue gas. This system is a step forward towards Modern Cremation system, Normally people are reluctant to criminate their loved one in Electric / Gas Cremation system. This system is so designed that cremation is done in a Traditional way. Pyre of wood is prepared on the Cremation Trolley, all the rituals are carried on the Trolley itself & then it is subjected to fire, some rituals are again carried out after fire is made. After all the rituals are carried out , the trolley is pushed into the Cremation furnace , the cremation is done in controlled condition. Provision has been made to perform a most important rituals in Hindu cremation system KAPAL KRIYA. The flue gas coming out from the cremation chamber is scrubbed with water and released to the environment through chimney . PROCESS:
Pyre of wood (Agni kastha) is made on the cremation trolley. The dead body is place upon the wood pyre, with leg pointing south. One layer of wood is placed over the dead body. All Rituals ( Riti - Rivaj ) are carried out on the trolley it self, viz. Dead body should be anointed with the ghee and wood chips
Eyes, mouth ears and nostrils are covered with coins
One person carry a pot of water on the left shoulder, with another person walks behind him with a sharp iron Instrument. Both of them go around the pyre anti-clockwise three times. When the person carrying the pot reaches the head each time, he stops for a second or two, and the one with the iron instrument hits the pot Gently to make a hole so that water flows out from the hole. The pyre is fired and there after the Fire rituals are performed, i.e. “Panch Samidha” giving five wood pieces by the close one to the burning pyre. After all the rituals, the cremation trolley is pushed inside the Cremation Furnace, for Cremation in controlled conditions. This cremation process occur with air is feed in Control Condition for perfect Cremation of the dead body. Cremation furnace gate is closed . Whole process of cremation can be seen by view glass provided at the gate of the cremation furnace. When the body is almost burned. A man open the door to perform the Kapal Kriya. In this ritual one man hits the head of dead body and pore the gee on head. The gases leaving the cremation furnace is scrubbed in wet scrubber and vent it to the environment through a chimney. After Completion of cremation the Ash (Asthiyan) for further ritual (Asthi puja) is collected from the Tray under the Trolley.
