Department Of Medical Imaging

18/01/2026

Radiologic Technologists☢️...Never Stop Learning🔰:

Never stop learning.
Not because you’re behind.
Not because you’re not good enough.
But because Radiologic Technology is always evolving.

It’s okay to ask questions.
It’s okay to double-check.
It’s okay to say, “Let me confirm this.”

Even radiologic technologists with years of experience
learn something new with every shift —
a new protocol, a better positioning,
a smarter way to protect the patient and yourself.

Learning doesn’t always mean books or exams.
Sometimes it’s listening to a senior,
watching how a colleague handles a case,
or realizing how you can do better next time.

You’re not expected to know everything.
What truly matters is that you care enough to keep improving —
for your patients,
for image quality,
for radiation safety,
and for yourself.

Go at your own pace.
Keep showing up.
Keep learning.

That alone already makes you a great
Radiologic Technologist. 🩻✨

06/01/2026

30/12/2025

28/12/2025

28/12/2025

17/12/2025

12/12/2025

🧲 Thursday's MRI Discussion 🧲
🤔 What is Partial Fourier in SIEMENS MRI?

📝Phase Partial Fourier in SIEMENS MRI (also called Partial Phase, Half Fourier, or Asymmetric Sampling) is a technique where the scanner acquires less than 100% of phase-encoding lines in k-space and mathematically reconstructs the missing part.
---

✅ Simple Definition

Phase Partial Fourier = acquiring 60–80% of phase-encoding data and estimating the rest using symmetry of k-space.

It reduces scan time but may slightly reduce SNR and increase image noise if too much is skipped.
---
🔍 How it works

k-space is symmetric about its center.

SIEMENS collects only the low-frequency + some high-frequency lines.

The missing high-frequency phase lines are reconstructed using:

Homodyne detection

POCS (Projection Onto Convex Sets)
---
📌 Where Phase Partial Fourier is used

Used in almost all sequences:

T1, T2 spin echo

Fast GRE sequences

3D sequences

DWI/EPI
---
🎯 Benefits

Benefit Explanation

Shorter scan time Fewer phase lines → faster TR loops
Less motion artifact Shorter time reduces patient movement
Useful for thin slices & 3D scans Improves feasibility
---
⚠️ Disadvantages

Issue Why it happens

Slight SNR loss Less data acquired
Phase artifacts If too much reconstruction needed
Ghosting In EPI if PF too high
---
💡 SIEMENS Settings You’ll See

In Siemens protocol, Phase PF appears as:

Partial Fourier (Phase): 6/8, 7/8, 5/8

Sometimes written as PF = 0.75 or 0.625

Common setting:
👉 6/8 (75%)
giving best balance of speed and image quality.
---
📘 Practical Example

If phase matrix = 320
Partial Fourier = 6/8

Scanner actually acquires: 320 × 0.75 = 240 lines

Remaining 80 lines = reconstructed.
---
🧠 Quick Summary (Easy to Remember)

Phase Partial Fourier = 60–80% phase data.

Purpose = Faster scan + less motion.

Cost = Slight SNR drop + possible artifacts.
---