05/09/2024
Small Fragment Instrument Basic Major Orthopedic Instrument Set. Get Quote Now
Detail
Drill Bit, Dia. 2.5, Q.C. 2
Drill Bit, Dia. 3.5, Q.C. 2
Counter Sink for 3.5, 4.0 mm Screw (6.0 Head) 1
Cortical Tap for 3.5 mm Screws, Q.C. 2
Cancellous Tap for 3.5 mm Screw Q.C. 1
Cancellous Tap for 4.0 mm Screws, Q.C. 1
Quick Coupling Handle 1
Tap Sleeve, 3.5 mm Diameter/Drill Sleeve 2.5 mm Diameter 1
Insert Sleeve Diameter 3.5 mm/2.7 mm 1
Small Screwdriver, 3.5 mm 1
Small Screwdriver Shaft, 2.5 mm Hex., Quick Coupling End 1
Small Depth Gauge 1
Neutral and Load Drill Guide, 2.5/3.5 mm 1
General Instruments
Sharp Hook 1
Holding Clip for Plates 2
Self-Holding Screw Forceps 1
Plate Bender for Small DCP 2
Bending templates, 5 and 7 holes, 1 pair 2
Self-Centering Bone Holding Forceps,190 mm 1
Reduction Forceps with points, 170 mm Thread Lock 1
Reduction Forceps Serrated Thread Lock 170 mm 1
Small Retractor, 6 mm Width 1
Small Retractor, 8 mm Width 1
Retractor for Small Fragments, with Broad Shank Long 2
Small Periosteal Elevator, with Straight Edge, 6 mm Width 1
IMPLANTS
Cortex Screws, Diameter 3.5 mm Units (each size)
10 mm - 28 mm (Increment of 2 mm) 4
32 mm - 40 mm (Increment of 4 mm) 4
Cancellous Screws 3.5 mm, Fully Threaded Units (each size)
12 mm - 30 mm (Increment of 2 mm) 2
35 mm - 60 mm (Increment of 5 mm) 2
Cancellous Screws 4.0 mm, Short Thread Units (each size)
12 mm - 30 mm (Increment of 2 mm) 2
35 mm - 50 mm (Increment of 5 mm) 2
Washer 4 mm 2
One Third Tubular Plates
2 Holes 1
3 Holes 1
4 Holes 2
5 Holes 2
6 Holes 2
7 Holes 1
8 Holes 1
Dynamic Compression Plates 3.5 mm
6 Holes 2
8 Holes 2
10 Holes 1
T-plates with 3 Thread Holes 3.5 mm
3 Holes 1
4 Holes 1
T-plates, Oblique Angled 3.5 mm
3 Holes, Left 1
4 Holes, Right 1
Kirschner Wires, 10 each 1.25/1.6/2.0 mm Dia, Length 150 mm 30
Screw Rack 1
Aluminium Graphic Case 1
