Crile Industries

10/10/2024

Need CNC fiber laser cutting operator In Lahore. Interested person contact me at +923097037136

04/08/2019

10/07/2019

Steam sterilization must be carried out according to a validated stream sterilization process (e.g. with a sterilizer meeting the specifications of EN 285 and validated according to EN 554). When using the fractional vacuum method, use the 134°C/2-bar program for sterilization with a minimum hold time of 5 minutes.

10/07/2019

Place instruments with the fine working end and/or microsurgery instruments in a suitable storage racks.
Secure instruments with lock in the first detent.

10/07/2019

After Use
For machine cleaning, place instrument in a wire basket suitable for the cleaning process (make sure cleaning solution and rinse water from machine comes into contact with all parts of instrument).
Completely dismantle any dismantable instruments.
Preferably dry disposal. For wet disposal, use an active cleaning disinfectant. Rinse the instrument thoroughly with clear, flowing water before machine cleaning and disinfection.
If necessary, treat with ultrasound according to the manufacture's instructions:
For effective mechanical support during manual cleaning.
For pre-treatment of instruments with dried-on grime before machine cleaning.
Microsurgical instruments and instruments with fine working ends should not be treated with ultrasound. They should be cleaned either manually or in the washing machine. In case of cleaning in a machine please use a suitable storage rack.
Clean manually or in a machine. Follow manufacturer's instructions.

10/07/2019

Treatment of brand new Instruments
Brand new instruments must be cleaned before the first sterilization or use. Protective caps and protective films must be removed completely, for example in the case of chisels, raspatories or microsurgical instruments.