VALL-CER

06/10/2021

Based on the findings of the in vitro study, VALLBOND coating doesn't affect the optical properties of zirconia ceramics .

Thin, non-retentive, monolithic restorations fabricated from novel translucent zirconia ceramics are widely used in contemporary dentistry. Because of the chemical inertness of zirconia, debonding of such restorations remains the main clinical complication. Limited evidence on the bonding performanc...

03/11/2019

ZIRCONIA ceramic CANTILEVER resin-bonded fixed dental prosthesis coated with VALLBOND adhesive coating.

02/05/2019

Replacement of the second lower premolar with a FULL zirconia MARYLAND resin-bonded fixed dental prosthesis coated with VALLBOND adhesive coating. Aleksandra Calic

27/02/2019

Replacement of a left lateral incisor with a zirconia ceramic CANTILEVER resin-bonded zirconia ceramic fixed dental prosthesis coated with VALLBOND adhesive coating and diastema closure with zirconia ceramic VENEERS on central incisors. Internal bleaching was performed on left central incisor prior to veneer preparation.

01/12/2018

ZIRCONIA ceramic CANTILEVER resin-bonded fixed dental prostheses coated with VALLBOND adhesive coating before cementation

RELIABLE cementation of zirconia ceramic cantilever bridge. The application of adhesive coating on zirconia prosthetic restorations substitutes the sandblasting for surface preparation and significantly increases the bond strength and its durability, no matter if glass-ionomer or adhesive luting cement are used.

08/11/2018

Two ZIRCONIA ceramic CANTILEVER resin-bonded fixed dental prostheses coated with VALLBOND adhesive coating before cementation

RELIABLE cementation of zirconia ceramic cantilever bridge. The application of adhesive coating on zirconia prosthetic restorations substitutes the sandblasting for surface preparation and significantly increases the bond strength and its durability, no matter if glass-ionomer or adhesive luting cement are used.

13/10/2018

Zirconia ceramic cantilever fixed dental prostheses coated with adhesive coating before cementation

10/10/2018

Clinical case: zirconia ceramic cantilever resin-bonded fixed dental prostheses coated with VALLBOND adhesive coating before cementation

08/06/2018

Clinical cases of ceramic dental restorations, which were coated with VALLBOND prior to cementation.

16/11/2017

Simple and unique procedure of synthesizing VALLBOND adhesive coating is presented in the following video.

04/11/2017

How thick is the VALLBOND coating?

As it can be seen from the cross-section of zirconia prosthetic restoration coated with VALLBOND the thickness of coating is less than 1 micrometer, so it does not affect dimensions of prosthetic restoration.

02/11/2017

MINIMALLY INVASIVE DENTISTRYThe application of VALLBOND adhesive coating on zirconia prosthetic restorations substitutes sandblasting for surface preparation and significantly increases the bond strength and its durability, no matter if glass-ionomer or composite resin are used.