Eddy Ponce

Eddy Ponce 8300 SW Creekside Place Second Floor, Beaverton, OR 97008

03/14/2022

*PLEASE CONTACT EDDY PONCE FOR A PHONE SCREEN AT 503 403 1978 or TEXT DIRECTLY AT 971-317-8630*

We are now hiring 30 mechanical assemblers doing HVAC assembly in Tualatin. This a DIRECT PLACEMENT. 3% 401k match, medical, vision, dental. PTO starts at 4 weeks, and tuition reimbursement.

Position Summary: The Assembler is responsible for preparing air handler units for assembly, working on shop floor, building plenums, grids and feeder components such as fans and filter racks.

Position Key Attributes

Ability to personally live safe and hold themselves and other team members accountable by having their back in support of our Safety core value.
Has integrity, works transparently and recognized for treating others with respect.
Takes accountability to create and execute solutions that deliver desired results and can “own it” in a Performance Driven Culture.
Works collaboratively as one team in a Teamwork culture.
Enjoys embracing and igniting change as a catalyst for improvement.
A “builder” who is comfortable in a continuous improvement culture.
Can thrive in a “legacy now” culture in which we strive to do the right thing for the company today, even if it is the hard thing, and leave behind a stronger company for the next generation of employees.
Position Responsibilities:

Cleaning air handler and grids
Installing filters
Basic assembly duties
May operate a screw gun
Installs wall panels, doors and internal parts
Finish caulking work
Helps install wall panels, doors, internal parts and install fans and filter racks


Position Qualifications:

Requirements:

Work independently and with others
Stand for prolonged periods on a concrete floor
Lift 25lbs
Average manual dexterity
Climb ladders
Work in high areas
Speak, read and write English
Shift:

Day: 5am-3:30pm Monday-Thursday. Must be available for working OT on Friday and sometimes Saturday.

Swing: 4pm-2:30pm Monday-Thursday. Must be available for working OT on Friday and sometimes Saturday.

Pay:

Day: $18 / Swing $19.50

If you are interested please apply or text me directly at 971 317 8630 with your name, preferred shift, and a number to reach you on for a brief screening. Thank you!

02/18/2022

*PLEASE CONTACT EDDY PONCE FOR A PHONE SCREEN AT 503 403 1978 or TEXT DIRECTLY AT 971-317-8630*

Description:

***They will be trained in the warehouse in Hillsboro but move to the Cornelius warehouse in Mid/Late Feb or Early/Mid March*******

495 N Holladay St Cornelius, OR 97113

Will be responsible for gathering materials for the assemblers and then putting them onto a cart and wheeling them out to the MFG floor. They use manual lists that are printed out to do this.
Receives and unloads freight, either manually or with equipment such as forklifts and pallet jacks and may involve receiving and storing of flammable, caustic or hazardous materials.
Checks for damaged goods; verifies quantity and quality of order; verifies items received with purchase order;
Issue and distribute spare parts to service repairs/orders as required.
Ensure good housekeeping principles are being used to keep work areas neat and orderly per 6S which includes light janitorial and maintenance duties of equipment and vehicles as required.
Through observation of work area(s), remain alert to and avoids unsafe behaviors and conditions or other hazards. Reports any observed hazards to supervisor. Participates in corrective measures when appropriate or authorized.
Maintains personal area in an orderly fashion, free of hazards.
Reports all injuries and/or near misses to supervisor immediately. Participates in and cooperates with accident investigations.
Becomes familiar with and practices all safety procedures. Seeks clarification or additional information when required. Strictly adheres to requirements for PPE and all safety rules.
To ship, receive, and handle materials, supplies, and equipment, and maintain inventory control and records; perform related work.
To complete ship preparation of Systems and Service Orders using custom made wood boxing / crating along with standard wood crating and cardboard boxing.
Shift:

Day 6am-2:30
Swing 1:30-10pm
Pay:

Day: $20
Swing: $23
Location: Hillsboro

This is an entry level opportunity that does not require previous warehouse experience but preferred.

If you are interested please apply or text me directly at 971 317 8630 with your name, preferred shift, and a number to reach you on for a brief screening. Thank you

02/18/2022

*PLEASE CONTACT EDDY PONCE FOR A PHONE SCREEN AT 503 403 1978 or TEXT DIRECTLY AT 971-317-8630*

We are now hiring 35 assembly, warehouse, chair upholstery technicians for our Newberg client!

Description:

Job Summary: This position performs routine and repetitive tasks on basic subassemblies and checks parts for quality and function. This is the entry/trainee level position within the Assembler job family. Duties and Responsibilities: Working under a trainer, incumbent performs routine subassembly tasks such as assembling valves, switches, hand and foot controls, etc.Pulls parts from inventory and operates hand tools/equipment on a variety of large and small parts.Routinely follows work instructions to perform tasks, may be required to interpret the results of certain test procedures, and may troubleshoot and repair parts when necessary, referring situations outside of instructions to the Supervisor.Achieves and maintains quality and productivity standards while following safety guidelines. Must not pose a risk to self or others.Maintains acceptable dependability level.

Shifts:

Day Shift

-Mon-Thurs, 5:30a-4:00p

Swing Shift

-Mon-Thurs, 3:20p-1:50a

Weekend Shift

-Fri-Sun, 5:00a-5:30p

Pay: $15-$20 Depending on shift

Location: Newberg

If you are interested please apply or text me directly at 971 317 8630 with your name, preferred shift, and a number to reach you on for a brief screening. Thank you!

02/16/2022

We are currently hiring Electromechanicals in the Hillsboro area.
Job Description:

Manufactures Control panels for HVAC units, Water Pump systems, and other industrial equipment that range in size to a large travel suitcase, to a Suburban size vehicle. There wiring is all to components and screwed into the metal casing there is no soldering involved at all. Candidates will be using tools such as electric drills, hammers, screw drivers and wire cutters the size of bolt cutters.
Location: Hillsboro

Qualified candidates will possess the following skills/experience:

Hand Tools Experience
1 year manufacturing experience
Good attenadance
Blueprint experience
Experience working with wiring
Pay: $15.50-$17

For immediate and confidential consideration, please contact me (Eddy) at 503 403 1978 or email me your updated resume. Thank you!

02/16/2022

*PLEASE CONTACT EDDY PONCE FOR A PHONE SCREEN AT 503 403 1978 or TEXT DIRECTLY AT 971-317-8630*

We are now hiring 6 package handlers in the Tigard area!

Job Description:

Each person in this group is responsible for packing 45 -55 phones per hour. They are handling orders that the consumer has contacted them directly. Scanning shipping label, building the fed ex box, applying the shipping label, and building out the contents of the ready to ship box. Very fast paced and on feet all day.

Qualifications:

Basic computer ability.
Ability to be on your feet for 8 hour shift
Strong attention to detail

Shifts:

Day: Tues-Sat, 6:00am-2:30pm

Swing: Mon-Fri, 2:45pm-11:15pm

Pay: $15 Day / $15.50 Swing ***$200-$400 additional monthly bonus potential***

Benefits:

• Benefits go into effective the 1st of the month following 30 days (this is already in effect) and the 401k plan remains the 1st of the month following 60 days

• Holiday Pay goes into effect at the start date of regular employment (this is already in effect)

• Parental leave: employees are now eligible after only 1 year (already in effect and based on their first day of regular employment)

• Employee referral

o Hourly positions: Earn $500 within 30 days after the employee has worked 3 months

o Salaried positions: Earn $1,000 within 30 days after they have worked 6 months

• Free Short Term Disability Insurance

• Basic Life and AD&D Insurance is now equal to 1x your annual earnings

• 16 hours of Floating Holiday accruals per year

• PTO is moving to a 30-day waiting period

If you are interested please apply or text me directly at 971 317 8630 with your name, preferred shift, and a number to reach you on for a brief screening. Thank you!

02/16/2022

*PLEASE CONTACT EDDY PONCE FOR A PHONE SCREEN AT 503 403 1978 or TEXT DIRECTLY AT 971-317-8630*

Now Hiring Entry Level Welders!

No major experience needed - looking for candidates with basic understanding of welding who are wanting to start a career!

Pay: $17-18/hr
Shift: Day and Swing
Location: Wilsonville, OR
Description:

Grinding and weld prep on cutters using hand air grinder, per procedure
Welding hard face on cutters
Grinding profile on cutters using hand air grinder; and profile grinder
Use of air hoist and fork lift.
Operation of cutting torch and propane pre-heat
Responsible for checking and verifying quality of all personal welds
Assure that area is kept in a clean and orderly manner
Responsible for identifying cutter size and sweep size
Maintain welder, tip, gun, and hood

If you are interested please apply or text me directly at 971 317 8630 with your name, preferred shift, and a number to reach you on for a brief screening. Thank you!

02/16/2022

*PLEASE CONTACT EDDY PONCE FOR A PHONE SCREEN AT 503 403 1978 or TEXT DIRECTLY AT 971-317-8630*

Hiring for Installation/Sustaining Technicians in Hillsboro, Oregon. Full time with benefits at large semiconductor company.

Will be working out of the Hillsboro office/site, but spending significant time on-site installing and maintaining/repairing equipment.

Schedule: 4 days, 10 hour shifts. Day shift, either M-Th or Tues- Friday (high preference on being open to all shifts but not necessary)

Description:

Installation and service support to ensure the continuation and expansion of TMS (thermal mgmt. systems) business.

Installing, maintaining and troubleshooting large equipment and machinery.

Primary job duties are to maximize output using constraint management techniques while sustaining process, equipment issues, training and cross training members while building a self-sustaining team.

Skills:

• Good problem solving ability is a must.

• Must be a self-starter capable of managing own activities as well as supporting team activities.

• Basic math skills are required.

• Candidate must be flexible and capable of handling multi-task operations and attention to detail is must

• Computer Systems: Computer literacy, MS word, excel, PPT, Email

Skills & Qualifications:

- Associates degree preferred in technical, automotive/diesel, or related field

- High school diploma or equivalent required

- Electro-Mechanical experience is required

- Experience with schematics is a plus

- Experience with hand tools/power tools required, multi meter experience is also preferred

- Strong communication skills, will be working with both client and team

- Ability to lift up to 50 lbs

- Comfortable in clean room environment and getting into clean room attire (bunny suit)

- Must be comfortable wearing a respirator

- Must be comfortable working in confined spaces and standing for long periods of time

- Must be comfortable working with hazardous materials and chemicals.

If you are interested please apply or text me directly at 971 317 8630 with your name, preferred shift, and a number to reach you on for a brief screening. Thank you!

02/16/2022

*PLEASE CONTACT EDDY PONCE FOR A PHONE SCREEN AT 503 403 1978 or TEXT DIRECTLY AT 971-317-8630*

Now Hiring Entry-Mid Level Facilities Maintenance Technicians

Pay: $17-25/hr (DOE)
Shift: Day
Location: Portland, OR
Description:

• Minor landscaping and grounds keeping

• Light-moderate construction and carpentry

• Light HVAC systems care and planned maintenance

• Care of building plumbing systems such as sinks and toilets

• Care of building clean dry air system

• Assist with coolant and chips management for machines

• Floor cleaning and polishing

• Basic roof maintenance

• Machine mist collection system installation and maintenance

• Light custodial and machine cleaning

• Installation and upkeep of machine coolant delivery system

• Order building maintenance supplies

• Change lights and bulbs inside and outside the building

If you are interested please apply or text me directly at 971 317 8630 with your name, preferred shift, and a number to reach you on for a brief screening. Thank you!

02/16/2022

*PLEASE CONTACT EDDY PONCE FOR A PHONE SCREEN AT 503 403 1978 or TEXT DIRECTLY AT 971-317-8630*

RETENTION BONUS

1 Month - $500

6 Months - $500

1 Year - $500

Top Three Must Haves:

1) Ability to stand and lift 20lbs repetitively

2) Must be open to a union job

3) Open to work ALL shifts (day, swing, grave) for 6 months

- They will NOT be asked to switch from shift to shift

Position Summary: The Baler position is the "entry level" position at, and the first job in the Union's "line of progression". Every member of the Union starts in the Baler position and works their way up to the next role with a pay raise. Will start as a Baler and move to the next job (Machine Operator/Tender) after they have proven reliability and work ethic in the Baler role.

Baler Duties:

-Working at the back end of the packaging machine to offload packed bags (looks like a box) and fit them like a puzzle onto a pallet.

-Keep count of boxes per pallet

-Quality check product in boxes versus work order

Machine Tender Duties:

-Operate computers and monitor errors and confirm machine set-ups

-Properly monitor product through the machine and remove defective products

-Keep machine properly cleaned and maintained (lubricate shaft, bearings, gears using grease guns, rags, and brushes)

-Move rolls of paper onto the feeders (push ~100 lbs)

Additional Skills & Qualifications:

STEEL TOE OR COMPOSITE TOE SHOES REQUIRED ***Looking for someone who has a positive attitude, a good record of attendance, and is mechanically inclined (preferred)*** -Open to work every shift (will have a one week notice if they need to move to an

Experience Level:

Pay $18.34

*Opportunity to make $20.32 inside of the first year

Initiation fee - $1,057.80 split over 6 paychecks ($176.3 per check)

After the initiation fee Union Members pay monthly dues - $48.48 ($24.24 per check)

Medical benefits are mandatory - $300.84 per month ($150.42 per check) *Same rate if dependents are added to the plan*

Day 7am-3pm

Swing 3pm-11pm, - (24 cent differential)

Grave 11pm-7am, - (34 cent differential)

**Must be open to working overtime and weekends when things get busy

If you are interested please apply or text me directly at 971 317 8630 with your name, preferred shift, and a number to reach you on for a brief screening. Thank you!

02/16/2022

*PLEASE CONTACT EDDY PONCE FOR A PHONE SCREEN AT 503 403 1978 or TEXT DIRECTLY AT 971-317-8630*

Pay: 17.21

Shift: Friday-Sunday 5am-5:30pm

*No THC test.
* START ASAP!

Job Summary:
This position performs parts preparation activities, applies powder-coat paint to
parts, and performs some pretreatment functions.
Duties and Responsibilities:
 Sets-up and operates painting equipment in production area and
troubleshoots problem situations as appropriate.
 Performs prototype painting for engineering and the model shop.
 Makes recommendations for improvements and may assist in designing and
manufacturing racks, fixtures, and masking used in the painting process.
 Inspects assigned work, tracks and records production orders, and may route
parts using material handling equipment.
 May perform pretreatment duties as assigned.
 Follows safety guidelines, achieves and maintains quality and productivity
standards, maintains an acceptable dependability level, and must not pose
risk to self or others.

02/13/2022

*PLEASE CONTACT EDDY PONCE FOR A PHONE SCREEN AT 503 403 1978 or TEXT DIRECTLY AT 971-317-8630*

Multiple Day and Swing Shift Openings at Precision Machining Shop in Tualatin. OR. Full time with benefits

Position: CNC Mill Set-up Machinist

Shifts:

Day 6am-2:30pm

Swing 2:30pm-11pm

Must Haves:

 Intermediate up to Journeyman level CNC Mill Machining Experience (Journeyman here = Vertical & Horizontal - Can hand the individual a set up book and they can run them all from start to finish)

 Process Oriented & must be willing to adapt to established processes (Well established / Large HQ in Cali and processes must be the same at both locations)

 Sense of Urgency - Agreements with large semiconductor customers in the area so deadlines are critical and quality must be upheld.

Summary of Responsibilities:

 Short run, precision CNC Machining and responsible for 1st runs

 CNC Machinist position sets-up and operates CNC and machining centers to fabricate precision machined metallic and non-metallic parts

 Machining Equipment includes vertical milling, horizontal milling, turning centers, turn/mill centers, and multi-axis machines.

 Specializing in setting up mill turn sub spindle live tooling lathes with minimal or no supervision from start to finish, while operating the machine to utilize the entire spectrum of the machine tool capabilities.

 Individual will work closely with Programming and Manufacturing Manager to provide constant feedback on cycle time reduction, machine optimization while manufacturing Quality parts on time and to customer’s specifications.

 Will provide guidance and instruct other machine operators, machinists, or other personnel, as assigned.

 Provides input to programmers and other technical personnel

 May be assigned to program CNC machines and machining centers utilizing CAD, CAM software.

 Collaborates with other personnel/departments, as required/assigned, providing input to, and integration with machining, CNC programming, CMM programming, engineering, inspection, manufacturing, and quality personnel.

 This position is responsible for ensuring efficient production, on-time delivery, and that quality of products meets the customer specifications.

If you are interested please apply or text me directly at 971 317 8630 with your name, preferred shift, and a number to reach you on for a brief screening. Thank you!

02/13/2022

*PLEASE CONTACT EDDY PONCE FOR A PHONE SCREEN AT 503 403 1978 or TEXT DIRECTLY AT 971-317-8630*

We are currently hiring Machine Operators!



Location: Hillsboro, Beaverton, Tigard, Tualatin, Wilsonville, Newberg

Qualified candidates will possess the following

3 months Machine Operator experience
Basic computer skills
Pay: $15-$20 (Payrates dependent on experience and type of position)

Shifts:

Day, Swing, Grave, and Compressed work weeks (12 hour shifts)

available

If you are interested please apply or text me directly at 971 317 8630 with your name, preferred shift, and a number to reach you on for a brief screening. Thank you!

02/13/2022

*PLEASE CONTACT EDDY PONCE FOR A PHONE SCREEN AT 503 403 1978 or TEXT DIRECTLY AT 971-317-8630*

We are hiring 30 fab operators to a large semiconductor company in Hillsboro!

Job Description:

Performs wafer fabrication functions in the production of semiconductor devices. Operates equipment in performing alignment, masking, tech and diffusion. In senior and highly skilled levels, performs equipment set-up and calibration, and may perform routine preventative maintenance tasks.

• Maintaining a safe work environment, which includes housekeeping, labeling and proper disposal of waste

• Following all environmental protection, safety and health procedures, reporting accidents and spills promptly, and making recommendations to improve safe work practices

• Setting up and operating production equipment; loading and unloading product wafers

• Setting up lot (batch) starts, box washing and microscope inspections

• Data entry and documentation of processing and shipment of lots

• Using computers for automated processing of product

• Transporting lots and processing materials throughout the Clean Room

• Cleaning the work area and complying with Clean Room work rules

Shift:

• D1 shift* – Sunday, Monday, Tuesday and every other Wednesday 6:00AM-6:00PM ($18)

• N1 shift – Sunday, Monday, Tuesday and every other Wednesday 6:00PM-6:00AM ($19.98)

• D2 shift* – Every other Wednesday, Thursday, Friday and Saturday 6:00AM-6:00PM ($18)

• N2 shift – Every other Wednesday, Thursday, Friday and Saturday 6:00PM-6:00AM ($20.70)

If you are interested please apply or text me directly at 971 317 8630 with your name, preferred shift, and a number to reach you on for a brief screening. Thank you!

02/13/2022

*PLEASE CONTACT EDDY PONCE FOR A PHONE SCREEN AT 503 403 1978 or TEXT DIRECTLY AT 971-317-8630*

Now hiring entry level machine operators in Tualatin to start ASAP!

Job Description:

You will be working at a plastic manufacturing company that support the automotive industry. Your job will be to load and unload small plastic components in automated machines and do various quality checks on them. You will be operating multiple machines as you progress.

Must Haves:

• Ability To Be On Feet For 12 Hours.

• Ability To Multitask

• Basic Computer Knowledge

• Prefer Manufacturing Experience But Open To Little Or No Experience.

Shifts: 12 hour shifts, making 2 hours of overtime every time you work. One week you will work 3 days and have 4 days off and the following yo will work 4 days and have 3 days off!

Shift D Friday – Sunday (E/O Thursday) 5:45pm-6:00am

Pay: $17.36

PERKS!!

As a direct employee you are also eligible for full benefit coverage for themselves at little or no cost to them, depending on the Medical plan they choose.

Benefits start the first day of the month after the date of hire, and include comprehensive health benefits including medical, dental, vision and self-referral for chiropractic, naturopathic, massage therapy and acupuncture.

Employees are given $672 per month to pick and choose the benefits above. Two-party and family benefits are offered but would be out of pocket, pre-tax payroll deductions.

Additional benefits that are fully company paid include an EAP, Short and Long term disability effective the same as the day as the health benefits.

After 6 months of employment, employees are eligible for a generous PTO plan that accrues based on hours worked, but could equal 18 hours a month (holiday hours are paid out of this bank when there is a holiday and the company is completely shut down even if they have not reached 6 months of employment.)

A 401(K) plan is also a benefit after 6 months of service and effective the next entry date at the beginning of every quarter, we offer a match of 2% on the first 4% of the employee contribution.

For immediate consideration please call me at 503 403 1978 to set up a phone screen or text me directly at 971 317 8630. Thank you!

02/13/2022

*PLEASE CONTACT EDDY PONCE FOR A PHONE SCREEN AT 503 403 1978 or TEXT DIRECTLY AT 971-317-8630*

We are currently hiring 20 Entry Level Machine Operators.



Location: Tualatin

Qualified candidates will possess the following

3 months Machine Operator experience
Basic computer skills
Pay: $16-$19 (Payrates dependent on shift)

Shifts:

Plating Operator

Shift A Monday-Wednesday (e/o Thursday) 5:45am-6:00pm ($17) AVG $19.34 x 1

*Shift B Monday-Thursday 5:45am-6:00pm ($20.07) x 3

Shift C Friday-Sunday (e/o Thursday) 5:45am-6:00pm ($18.53) AVG $21.08 x 2

Shift D Friday-Sunday (e/o Thursday) 5:45pm-6:00am x6

Stamping Operator

*Shift B Monday-Thursday 5:45am-6:00pm ($20.07) x 3

Shift D Friday-Sunday (e/o Thursday) 5:45pm-6:00am ($17.92) AVG $20.38 x 3

If you are interested please apply or text me directly at 971 317 8630 with your name, preferred shift, and a number to reach you on for a brief screening. Thank you!

02/13/2022

*PLEASE CONTACT EDDY PONCE FOR A PHONE SCREEN AT 503 403 1978 or TEXT DIRECTLY AT 971-317-8630*

We are now hiring 20 package operators for a production company in Tualatin!

Shift:

Day/ Night

Front Half of Week Sun-Tues (every other Saturday)

or

Back Half of Week Thurs-Sat (every other Wednesday)

6am-6:30pm or 6pm-6:30am

Pay: $18 Day / $20.50 Night

Job Description:
Responsible for efficiently monitoring and operating downstream machines and related capping and casing equipment. Ensure and upholds quality standards by performing periodic package and case integrity tests. Responsible for proper set-up and changeovers of equipment and supplies. Performs rework and sanitation duties as required. Responsible for efficient operation of automated Palletizer system. Troubleshoot problems by using computer touch screen. Use gas or electric powered forklift to move product in a safe manner to specific warehouse locations.

Work Environment:
Fast paced food production environment. Monitoring the packaging line and product that just came out of packaging machine. Can have strong odors/smells and able to stand for 12+/hrs.

Qualifications:
Has worked at lease two years in a production/warehouse environment.
Has to be able to work 12hr shift

Performance Expectations: Able to read the written work orders. Capable of following supervisor instructions and must be able to operate independently after 90 days.

If you are interested please apply or text me directly at 971 317 8630 with your name, preferred shift, and a number to reach you on for a brief screening. Thank you!

02/13/2022

*PLEASE CONTACT EDDY PONCE FOR A PHONE SCREEN AT 503 403 1978 or TEXT DIRECTLY AT 971-317-8630*

We are now hiring 10+ Grave Warehouse Workers in Beaverton!

- Material movement, picking orders of electrical parts kept in boxes.
- Use an RF scan gun to scan barcodes and find inventory
- Train on using a forklift
- Palatalize and organize shipments for delivery

*** MUST HAVE STEEL OR PROTECTIVE TOE BOOTS***

Shift: M-F (10am - 8pm)

Pay. $20.50

If you are interested please apply or text me directly at 971 317 8630 with your name, preferred shift, and a number to reach you on for a brief screening. Thank you!

02/13/2022

*PLEASE CONTACT EDDY PONCE FOR A PHONE SCREEN AT 503 403 1978 or TEXT DIRECTLY AT 971-317-8630*

We are now hiring 10 order pickers for a local Tigard distribution company. This is a long term opportunity with upward mobility for career advancement. In addition, there is a retention bonus of $1500.

Job Description: This person will be responsible for picking, packing, and stocking items that are received. Items can range from large metal or PVC piping picked with fork-lift, to 30+ small fasteners or endcaps - depending on the phase of the construction project.

Duties:

-Use RF scan gun to locate inventory

-Correctly pick, pack, and pull item type and qty

-Operate pallet-jack, fork-lift, and push cart depending on inventory type

-Organize staging area by priority

-Maintain clean work environment (they may have to sweep and mop)

-Operate computers at will-call booth

-Assist customers (internal and external) in item look-ups, availability, and order placement.

Shift: M-F (Start between 5am-9am) - 8 hour shifts.

Pay: $18

If you are interested please apply or text me directly at 971 317 8630 with your name, preferred shift, and a number to reach you on for a brief screening. Thank you!

Address

Beaverton, OR

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Telephone

(503) 403-1978

Website

Alerts

Be the first to know and let us send you an email when Eddy Ponce posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Practice

Send a message to Eddy Ponce:

Shortcuts

Share