BIC Trikes

01/25/2024

Here is a 1999 Yamaha Royal Star We have done.

01/12/2024

This is David Moss with BIC Trikes. Here is a link to our website.

Here at BIC Trikes we build custom made bolt on Outrigger trike rear ends for motorcycles. Our trike rear ends will fit all makes and models. And now we have shippable kits that we can ship anywhere in the United States. We also have a BIC Trike logo apparel. all apparel are available for purchase

01/12/2024

Here is a video showing the latest outlaw kit that we had to fix. If you are thinking about getting a outrigger kit for your bike make sure you do your homework. There are good outrigger kits out there like ours but they're also a bunch of Junk out there.

https://www.bictrikes.com/

01/11/2024

Here is a bike that nobody else could do. The customer called Voyager, Trip Trike, and everyone else but everybody said it couldn't be done. Then he got ahold of use and we were able to build it for him.

01/08/2024

Here is a demonstration of a sportster with a BIC Trikes rear end on it.

showing how our rear ends ride on the road. We are using an H-D Forty-Eight SportsterHere is a link to our price list.https://www.facebook.com/49816324039418...

01/01/2024

This is David Moss with BIC Trikes. 2023 was a very busy but challenging year. And as we all know inflation hit hard. So due to the economical situation we will be raising our prices on April 1st 2024. We understand the difficult times we are living in and are trying our best to keep the prices down. All orders made before April 1st will be under the 2023 price list. There is always an updated price list on our website bictrikes.com Thank you for your understanding and support. Here is a look at our 2024 price list.

01/01/2024

This is David Moss with BIC Trikes. First of all I would like to apologize for any inconvenience if anybody has been trying to get a hold of me through this Facebook account. Unfortunately we were locked out for a significant amount of time, And just recently got it back. If you ever need to get a hold of me you can go to our website bictrikes.com I appreciate you understanding thank you and God bless.

07/12/2022

https://www.bictrikes.com/forum/shippable-kits/i-took-the-plunge

I'm excited to say that driving up to BIC Trike headquarters, and dropping off my '06 Royal Star Tour Deluxe was an awesome experience! David and his family have a very cool operation running there, and I am very anxious to pick up my new trike in a few weeks. Based on what I've seen in the videos a

05/23/2022

This is David Moss with BIC Trikes. We were locked out of our Facebook account for a little while but have regained access. Sorry about any inconvenience for anybody trying to get ahold of us. You can always go to our website bictrikes.com to contact us if we do not get back with you on Facebook. Thank you and God bless

Here at BIC Trikes we build custom made bolt on Outrigger trike rear ends for motorcycles. Our trike rear ends will fit all makes and models. And now we have shippable kits that we can ship anywhere in the United States. We also have a BIC Trike logo apparel. all apparel are available for purchase

03/17/2021

This is David Moss with BIC Trikes. We have some exciting news. We have finally got our fully functional website up and running. It even has a store, so make sure you check out our apparel, and leave a comment on the contact us page letting us know what kind of apparel you would like to see us sell in the future. Our website is
bictrikes.com

Here at BIC Trikes we build custom made bolt on Outrigger trike rear ends for motorcycles. Our trike rear ends will fit all makes and models. And now we have shippable kits that we can ship anywhere in the United States. We also have a BIC Trike logo apparel. all apparel are available for purchase

02/24/2021

https://youtu.be/R3LxzAfvv0Y

02/11/2021

Here is a 1998 Honda Helix 250cc Scooter we did.
https://youtu.be/sYKKnAdWjcI

12/30/2020

This is David Moss with BIC Trikes. I would like to say as we're ending the year 2020 that God has really blessed this company. Not to say that 2020 was without its challenges, because we all know how challenging this year has been.
Last year I debated about going full-time with this company. But honestly I was a little apprehensive about leaving the factory job I had. It was a good paying, good benefits, and overall a good job. I have found out when we are not willing to take a step of faith God sometimes gives us a little nudge. So in January of this year I left my factory job and took BIC Trikes full time.
Then of course covid-19 hit. But unlike a lot of small businesses I was blessed. Make no mistake I know it was by the grace of God. Instead of losing orders we had more orders coming in to the point we got 12 weeks backorder. Even when we had to shut down production for a couple of weeks due to supply issues stimming from covid-19.
God blessed it where we had just enough material to build a single axle motorcycle trailer prototype. Which we use by hooking it up to my 2010 Honda Fury, and going on a 5 State 1800 mile two-week round trip vacation. Which was a lot of fun and challenging due to running into a lot of rain on the way home LOL.
Unfortunately we have been too busy to proceed on the motorcycle trailer part of the business. However we did get a lot of data and some design ideas from our 1800 mile pilot run. Just as soon as we get a chance we will be expanding the business to add pull-behind motorcycle trailers.
I know this has been a long post but I said all that to say this. We could not have done this alone. I want to say thank you to my wonderful wife Mechelle who has always supported me. Thank you to ATP well supplies, IGH fabrication, Texas Trailer Supply, and CFC powder coating. I also want to give a special things to all my customers. You are the ones that made 2020 successful. And most of all I want to give things to my Lord and Savior

12/02/2020

I'm happy to announce that we have partnered with a new company to supply our rims and tires. This is going to give us more of a variety not only in the aluminum rims but also in the Chrome and steel rims we offer. Here is our new lineup starting with aluminum then going to Chrome and then the steel rims.

11/08/2020

We have a new DIY Universal Outrigger shippable kits.

https://youtu.be/NAAWGMKArrQ

Prices on our new DIY shippable kits. BIC Trikes link to our price list https://m.facebook.com/story.php?story_fbid=1583860295157800&id=498163240394183 You c...

11/05/2020

https://youtu.be/UzwPjosyGKU

2000 Valkyrie with our Outrigger bolt on trike kit. here is a link to our price list. https://m.facebook.com/story.php?story_fbid=1583860295157800&id=4981632...

08/23/2020

This is David Moss with BIC Trikes. I want to give an update with the state of business. Unfortunately we have had a setback. Wednesday the 19th I woke up with a swollen elbow thought that I must have hit it on something. By Friday my whole right arm was swollen and I couldn't move it. So Friday morning I went to the doctor and he admitted me into the hospital because my arm was septic. Apparently it wasn't swollen because of hitting something. I had Bursitis, which is an infection of the bursa in my elbow due to, overuse of a joint, or infection of the Bursa itself. The infection had gotten so bad that my blood had became septic. So I spent all day Friday in the hospital getting fluids pumped into me and antibiotics. When they send me home they told me that I was not to use my right arm at all and no work for 5 days. But I did not listen at first. On Saturday 21st I had 2 bikes show up to for drop off, and one for pickup. All I did was load and unload the bikes and my elbow swelled again. So I will not be doing any work with my right arm for the next 5 days. This means we may be pushed back a little bit, some bikes may be delayed. I do apologize but as soon as I'm 100% again I will work extra hard to get caught back up. I would like to say thank you for your understanding and prayers. God bless

06/27/2020

2010 Honda Fury

https://youtu.be/cAdKZgZnZG8

Demonstrating our trike rear ends on a 2010 Honda Fury.