13/03/2018
The used Philips Brilliance CT 64 scanner is among the most versatile CT scanners on the market. It performs a wide variety of studies at a very high image quality. With a 64 slice count, the Brilliance 64 CT is what we recommend for cardiac, trauma, pediatric, and pulmonary exams where a high slice count is required for its speed and image resolution.
The Philips MRC tube in the Brilliance 64 also reduces time between sequences and operators don’t have to wait to continue an exam.
Philips CT scanners also include the DoseWise technology, which performs very well for using the smallest dose size while achieving very high image resolution.
Element Available Condition
Detectors Yes Possibly the Originals (2005)
Generator Yes Good condition, with some paint details.
Tube Yes The tube was changed on 2010.
CIRS Yes Little localpreventive maintenance
CT BOX Yes
Console Yes It has a broken outer shell, does not affect its
Driver Disable Switch Yes
GANTRY FRONT STATOR
Ghost & I-Box Yes Good condition
Brake motor rotor Yes Perfect working condition
Rotor locking pin Yes
Oil cooler Yes Good working condition
GANTRY FRONT –ROTOR
High Speed Starter (HSS) Yes
A Plane Yes
APM KPM Yes
System Control & R Host Yes Good working condition
DPM Yes
DMC Yes
GANTRY LEFT (TOP)
Switch Panel Yes
Soft Start Resistor Yes
Fuse Yes
Contactor Assembly Yes
AC Control UNIT Yes
GANTRY LEFT (BOTTOM)
Tilt Actuator Yes
UTK step down Yes
Utility transformer Yes
UTK contactor Yes
CTK contactor Yes
I-BOX (interfeceBOX) Yes Good condition
Intercom PCB Yes
GHOST Yes
Console tramsformerCT Yes
GANTRY RIGHT (TOP)
Tilt position potentiometers Yes
Main Drive Transformer MDT Yes
Tilt limits switches Yes
Tilt actuator Yes
GANTRY RIGHT (BOTTON)
Tilt Power PCB Yes
Tilt Lift switches Yes
GANTRY REAR (BOTTON)
EMI filter Yes
Spindle Blok Yes
2HP Main Drive Motor Yes
GMP –Rear Top Yes
GMP Power Board –Right leg Yes
GANTRY REAR –SYSTEMS WITH GMP
Bi-directional Transceiver and interface Box Yes
Spindle Blok, Type 701 Yes
3 HP Motor and Bracket Yes
GANTRY REAR –BIG BORE
Power Brush Blocks Yes
Signal Brush Block Yes
Wave guide(stator) + Fiber/Lens (rotor) Yes
Optical Receiver (stator) Yes
SLIP RING AND DATA PATH
Brake Yes
Driver Motor Yes
Inverter and Monitor Yes
Helper Spring Yes
Scissors Yes
CCC Yes
Power PCB Yes
Fuse Assy Yes
GALAXY COUCH –VERTICAL
Belt Yes
Clutch Yes
Drive Motor Yes
ASC Controller (under table) Yes
Absolute Encoder Yes
Brake Yes
Relative Encoder Yes
Tube current data:
Exposure seconds : 1413447
Exposure counts : 579124
Data from RHOSE
Exposure seconds : 2881258
Exposure counts : 12332475
